oap reboot
Use oap reboot to reboot an OAP module.
Syntax
oap reboot slot slot-number
oap reboot chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies an OAP module by its slot number.
chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member device by the member ID and slot number.
Examples
# Reboot the OAP module in the specified slot.
<Sysname> oap reboot slot 1 This command might cause data loss on the hard disk if the card is not been shut down. Continue? [Y/N]:y Rebooting the OAP card by command…