oap connect
Use oap connect to log in to the CLI of an OAP module from the device. You can also use this command to log in to another operating system that is running on a card in the device.
Syntax
oap connect slot slot-number
oap connect chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies an OAP module by its slot number.
chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member device by the member ID and slot number.
Usage guidelines
To return to the CLI of the hosting device from the OAP module, press Ctrl+K.
Examples
# Log in to the CLI of the OAP module in the specified slot.
<Sysname> oap connect slot 1 Press CTRL+K to quit. Connected to OAP.