Setting the LLDP reinitialization delay
When the LLDP operating mode changes on a port, the port initializes the protocol state machines after an LLDP reinitialization delay. By adjusting the delay, you can avoid frequent initializations caused by frequent changes to the LLDP operating mode on a port.
To set the LLDP reinitialization delay for ports:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Set the LLDP reinitialization delay. | lldp timer reinit-delay delay | The default setting is 2 seconds. |