LLDP configuration task list

Tasks at a glance

Performing basic LLDP configurations:

• (Required.) Enabling LLDP

• (Optional.) Setting the LLDP bridge mode

• (Optional.) Setting the LLDP operating mode

• (Optional.) Setting the LLDP reinitialization delay

• (Optional.) Enabling LLDP polling

• (Optional.) Configuring the advertisable TLVs

• (Optional.) Configuring the management address and its encoding format

• (Optional.) Setting other LLDP parameters

• (Optional.) Setting an encapsulation format for LLDP frames

• (Optional.) Disabling LLDP PVID inconsistency check

(Optional.) Configuring LLDP trapping and LLDP-MED trapping

(Optional.) Setting the source MAC address of LLDP frames to the MAC address of the subinterface associated with the specified VLAN

(Optional.) Enabling the device to generate ARP or ND entries for received management address LLDP TLVs