Configuration example for QinQ termination supporting PPPoE server
Network requirements
As shown in Figure 8:
QinQ is enabled on GigabitEthernet 1/0/2 of Layer 2 Switch B.
The router acts as a PPPoE server. Hosts in different VLANs access the Internet through the PPPoE server.
Configure QinQ termination, so that the hosts can access the Internet.
Figure 8: Network diagram
Configuration procedure
# Configure VLANs and QinQ termination. For the configuration procedure, see "Ambiguous QinQ termination configuration example." (Details not shown.)
# Configure the router as the PPPoE server. Configure PPPoE settings on GigabitEthernet 1/0/1.10 on the router. For more information about PPPoE configuration, see Layer 2—WAN Configuration Guide. (Details not shown.)