Scheduling a load balancing test

Perform this task in any view to test the load balancing result.

To schedule a load balancing test:

Task

Command

Schedule an IPv4 load balancing test (in standalone mode).

loadbalance schedule-test ip protocol { protocol-number | icmp | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port

Schedule an IPv4 load balancing test (in IRF mode).

loadbalance schedule-test ip protocol { protocol-number | icmp | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port [ slot slot-number ]

Schedule an IPv6 load balancing test (in standalone mode).

loadbalance schedule-test ipv6 protocol { protocol-number | icmpv6 | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port

Schedule an IPv6 load balancing test (in IRF mode).

loadbalance schedule-test ipv6 protocol { protocol-number | icmpv6 | tcp | udp } destination destination-address destination-port destination-port source source-address source-port source-port [ slot slot-number ]