Associating Track with a percentage threshold list

About percentage threshold list

A percentage threshold list uses a percentage threshold to measure the state of the list.

Procedure

To associate Track with a percentage threshold list:

Task

Command

Remark

1. Enter system view.

system-view

N/A

2. Create a track entry.

See "Associating Track with a detection module object."

Create a track entry before you add it as an tracked object to a tracked list.

A minimum of one track entry must be created.

3. Create a percentage threshold list and enter its view.

track track-entry-number list threshold percentage

By default, no tracked lists exist.

4. Add the track entry as an object to the tracked list.

object track-entry-id [ not ]

By default, a tracked list does not contain any objects.

Repeat this step to add all interested objects to the tracked list.

5. Configure the threshold values used to determine the state of the percentage threshold list.

threshold percentage { negative negative-threshold | positive positive-threshold } *

By default, the negative state threshold is 0% and the positive state threshold is 1%.

6. (Optional.) Set the delay for notifying the application module of tracked list state changes.

delay { negative negative-time | positive positive-time } *

By default, the Track module notifies the application module immediately when the tracked list state changes.