Specifying an IPv4 VRRP operating mode
A VRRP group can operate in either of the following modes:
Standard mode—Only the master can forward packets.
Load balancing mode—All members that have an AVF can forward packets.
After an IPv4 VRRP operating mode is configured on a router, all IPv4 VRRP groups on the router operate in the specified operating mode.
To specify an IPv4 VRRP operating mode:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify an IPv4 VRRP operating mode. |
| By default, VRRP operates in standard mode. |