Setting the port shutdown mode

On detecting a unidirectional link, DLDP shuts down the ports in one of the following modes:

To enable remote OAM loopback on a DLDP port, set the port shutdown mode to manual. Otherwise, DLDP automatically shuts down the port when it receives a packet sent by itself. This causes remote OAM loopback failure. For more information about Ethernet OAM, see "Configuring Ethernet OAM."

To set port shutdown mode:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Set port shutdown mode.

dldp unidirectional-shutdown { auto | manual }

The default mode is auto.