Configuring a static IPv4SG binding
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 2 Ethernet interface view. | interface interface-type interface-number | N/A |
3. Configure a static IPv4SG binding. | ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address | mac-address mac-address } [ vlan vlan-id ] | By default, no static IPv4SG bindings exist on an interface. To configure a static IPv4SG binding for the ARP attack detection feature, the vlan vlan-id option must be specified, and ARP attack detection must be enabled for the specified VLAN. You can configure the same static IPv4SG binding on different interfaces. |