Configuring an IKE IPv4 address pool
To perform centralized management on remote users, an IPsec gateway can use an IPv4 address pool to assign private IPv4 addresses to remote users.
You must use an IKE IPv4 address pool together with AAA authorization by specifying the IKE IPv4 address pool as an AAA authorization attribute. For more information about AAA authorization, see "Configuring AAA."
To configure an IKE IPv4 address pool:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure an IKE IPv4 address pool. | ike address-group group-name start-ipv4-address end-ipv4-address [ mask | mask-length ] | By default, no IKE IPv4 address pool exists. |