Specifying an authentication domain for third-party authentication
You must specify an authentication domain for third-party authentication. Make sure the authentication, authorization, and accounting methods in the authentication domain for portal users are none.
To specify an authentication domain for third-party authentication on an interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | Only Layer 3 interfaces are supported. |
3. Specify an authentication domain for third-party authentication. | portal extend-auth domain domain-name | By default, no authentication domain is specified for third-party authentication. |
To specify an authentication domain for third-party authentication on a service template:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter service template view. | wlan service-template service-template-name | N/A |
3. Specify an authentication domain for third-party authentication. | portal extend-auth domain domain-name | By default, no authentication domain is specified for third-party authentication. |