Configuration procedure
To enable portal authentication on an interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. | interface interface-type interface-number | The interface must be a Layer 3 interface. |
3. Enable portal authentication. |
| Enable IPv4 portal authentication, IPv6 portal authentication, or both on the interface. By default, portal authentication is disabled. |
To enable portal authentication on a service template:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter service template view. | wlan service-template service-template-name | N/A |
3. Enable IPv4 direct portal authentication. | portal enable method direct | By default, IPv4 direct portal authentication is disabled. |