C
- card
- interface card operating mode (CPOS), Configuring the operating mode of an interface card
- CE1 interface
- display, Displaying and maintaining CE1 interfaces
- maintain, Displaying and maintaining CE1 interfaces
- parameter configuration, Configuring other CE1 interface parameters
- WAN configuration, Configuring a CE1 interface
- WAN configuration (CE1 mode), Configuring a CE1 interface in CE1 mode
- WAN configuration (E1 mode), Configuring a CE1 interface in E1 mode
- CE1 mode
- WAN CE1 interface configuration, Configuring a CE1 interface in CE1 mode
- changing
- combo interface active port (Ethernet combo), Changing the active port of a combo interface
- interface type (GigabitEthernet), Changing the interface type
- interface type (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface, Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- interface type (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- interface type (POS), Changing the interface type
- interface type (POS-Layer 3 > GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- channel
- channelized POS. Use CPOS
- interface configuration (CPOS E1), Configuring an E1 channel
- interface configuration (CPOS T1), Configuring a T1 channel
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (POS channel), Configuring a POS channel interface
- interface configuration (WAN CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- interface configuration (WAN CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- channelizing
- interface (CPOS 2.5 Gbps > 622 Mbps), Channelizing a 2.5 Gbps CPOS interface into 622 Mbps channels
- interface (CPOS 2.5 Gbps 622 Mbps > 155 Mbps), Channelizing a 622 Mbps channel into 155 Mbps channels on a 2.5 Gbps CPOS interface
- collecting
- subinterface rate statistics collection (POS), Enabling subinterface rate statistics collection
- subinterface rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- configuring
- interface (CPOS E1 channel), Configuring an E1 channel
- interface (CPOS T1 channel), Configuring a T1 channel
- interface (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface (CPOS-E1), CPOS-E1 interface configuration example
- interface (Ethernet single combo), Configuring a combo interface
- interface (Ethernet), Configuring Ethernet interfaces
- interface (high-speed CPOS), High-speed CPOS interface configuration example
- interface (inloopback), Configuring an inloopback interface
- interface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- interface (loopback), Configuring a loopback interface
- interface (null), Configuring a null interface
- interface (POS channel), Configuring a POS channel interface
- interface (POS), Configuring POS interfaces, Configuring a standard POS interface, POS interface configuration examples
- interface (WAN CE1 in CE1 mode), Configuring a CE1 interface in CE1 mode
- interface (WAN CE1 in E1 mode), Configuring a CE1 interface in E1 mode
- interface (WAN CE1), Configuring a CE1 interface
- interface (WAN CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- interface (WAN CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- interface (WAN CT3), Configuring a CT3 interface
- interface (WAN E1-F in framed mode), Configuring an E1-F interface in framed mode
- interface (WAN E1-F in unframed mode), Configuring an E1-F interface in unframed mode
- interface (WAN E1-F), Configuring an E1-F interface
- interface (WAN serial synchronous), Configuring a synchronous serial interface
- interface (WAN serial), Configuring a serial interface
- interface (WAN T3), Configuring a T3 interface
- interface (WAN), Configuring WAN interfaces
- interface B1/B2/B3 alarms (POS), Configuring B1/B2/B3 alarms for standard POS interfaces
- interface basic settings (Ethernet), Configuring basic settings of an Ethernet interface or subinterface
- interface basics (CPOS), Configuring basic functions of a CPOS interface
- interface card operating mode (CPOS), Configuring the operating mode of an interface card
- interface common settings (Ethernet), Configuring common Ethernet interface settings
- interface dampening (Ethernet), Configuring dampening on an Ethernet interface
- interface jumbo frame support (Ethernet), Configuring jumbo frame support
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- interface operating mode (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- interface operating mode (Ethernet), Configuring the operating mode
- interface operating mode (high-speed CPOS), Configuring the operating mode of a 2.5 Gbps CPOS interface
- interface parameter (WAN CE1), Configuring other CE1 interface parameters
- interface parameter (WAN E1-F), Configuring other E1-F interface parameters
- interface parameters (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- interfaces in bulk, Bulk configuring interfaces, Configuration procedure
- subinterface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- subinterface (POS), Configuring a POS subinterface
- subinterface (WAN serial), Configuring a subinterface
- subinterface basic settings (Ethernet), Configuring basic settings of an Ethernet interface or subinterface
- connecting
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router (POS), Connecting routers through POS interfaces across a Frame Relay network
- CPOS interface
- application scenario, CPOS interface application scenarios
- basic configuration, Configuring basic functions of a CPOS interface
- card operating mode configuration, Configuring the operating mode of an interface card
- configuration, Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- CPOS-E1 configuration, CPOS-E1 interface configuration example
- display, Displaying and maintaining CPOS interfaces
- E1 channel configuration, Configuring an E1 channel
- hardware compatibility, Hardware compatibility with CPOS interfaces
- high-speed configuration, High-speed CPOS interface configuration example
- high-speed interface operating mode, Configuring the operating mode of a 2.5 Gbps CPOS interface
- interface configuration (POS), Configuring POS interfaces, POS interface configuration examples
- maintain, Displaying and maintaining CPOS interfaces
- overhead byte, Overhead bytes
- T1 channel configuration, Configuring a T1 channel
- troubleshoot, Troubleshooting CPOS interfaces
- troubleshoot E1 channel loop+link layer protocol down detected, Loop and link layer protocol down state detected on serial interfaces created for E1 channels on the CPOS interface
- types, CPOS interfaces
- CT3 interface
- display, Displaying and maintaining CT3 interfaces
- maintain, Displaying and maintaining CT3 interfaces
- WAN configuration, Configuring a CT3 interface
- WAN configuration (CT3 mode), Configuring a CT3 interface in CT3 mode
- WAN configuration (T3 mode), Configuring a CT3 interface in T3 mode
D
- dampening
- interface dampening (Ethernet), Configuring dampening on an Ethernet interface
- device
- interface basic configuration (CPOS), Configuring basic functions of a CPOS interface
- interface card operating mode (CPOS), Configuring the operating mode of an interface card
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (Ethernet), Configuring Ethernet interfaces
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (POS channel), Configuring a POS channel interface
- interface configuration (POS), Configuring POS interfaces, Configuring a standard POS interface, POS interface configuration examples
- interface configuration (WAN CE1 in CE1 mode), Configuring a CE1 interface in CE1 mode
- interface configuration (WAN CE1 in E1 mode), Configuring a CE1 interface in E1 mode
- interface configuration (WAN CE1), Configuring a CE1 interface
- interface configuration (WAN CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- interface configuration (WAN CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- interface configuration (WAN CT3), Configuring a CT3 interface
- interface configuration (WAN E1-F in framed mode), Configuring an E1-F interface in framed mode
- interface configuration (WAN E1-F in unframed mode), Configuring an E1-F interface in unframed mode
- interface configuration (WAN E1-F), Configuring an E1-F interface
- interface configuration (WAN serial synchronous), Synchronous serial interface, Configuring a synchronous serial interface
- interface configuration (WAN serial), Configuring a serial interface
- interface configuration (WAN T3), Configuring a T3 interface
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router connection (POS), Connecting routers through POS interfaces across a Frame Relay network
- interface parameter configuration (WAN CE1), Configuring other CE1 interface parameters
- interface parameter configuration (WAN E1-F), Configuring other E1-F interface parameters
- interface type change (GigabitEthernet), Changing the interface type
- interface type change (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface, Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- interface type change (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface, Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- interface type change (POS), Changing the interface type
- subinterface configuration (POS), Configuring a POS subinterface
- subinterface configuration (WAN serial), Configuring a subinterface
- subinterface rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- displaying
- bulk interface configuration, Displaying and maintaining bulk interface configuration
- interface, Displaying and maintaining loopback, null, and inloopback interfaces
- interface (CPOS), Displaying and maintaining CPOS interfaces
- interface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- interface (POS), Displaying and maintaining POS interfaces
- interface (WAN CE1), Displaying and maintaining CE1 interfaces
- interface (WAN CT3), Displaying and maintaining CT3 interfaces
- interface (WAN E1-F), Displaying and maintaining E1-F interfaces
- interface (WAN T3), Displaying and maintaining T3 interfaces
- interfaces (WAN serial), Displaying and maintaining serial interfaces
- subinterface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
E
- E1
- interface configuration (CPOS E1 channel), Configuring an E1 channel
- troubleshooting interface loop+link layer protocol down detected (CPOS), Loop and link layer protocol down state detected on serial interfaces created for E1 channels on the CPOS interface
- E1 mode
- WAN CE1 interface configuration, Configuring a CE1 interface in E1 mode
- E1-F interface
- display, Displaying and maintaining E1-F interfaces
- maintain, Displaying and maintaining E1-F interfaces
- parameter configuration, Configuring other E1-F interface parameters
- WAN configuration, Configuring an E1-F interface
- WAN configuration (framed mode), Configuring an E1-F interface in framed mode
- WAN configuration (unframed mode), Configuring an E1-F interface in unframed mode
- enabling
- interface loopback testing (Ethernet), Enabling loopback testing on an Ethernet interface
- subinterface rate statistics collection (Ethernet), Enabling subinterface rate statistics collection on an Ethernet interface
- subinterface rate statistics collection (POS), Enabling subinterface rate statistics collection
- subinterface rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- subinterface traffic statistics (Ethernet), Enabling the traffic statistics feature on an Ethernet subinterface
- Ethernet
- interface. See
- interface type change (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- interface type change (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- subinterface. See Ethernet interface, Ethernet subinterface, subinterface
- Ethernet interface
- 10-GE J0 and J1 overhead bytes setting;010-GE J0 and J1 overhead bytes setting, Setting the J0 and J1 overhead bytes
- 10-GE operating mode;10-GE operating mode, Configuring the operating mode and related parameters for a 10-GE interface
- 10-GE parameter configuration;10-GE parameter configuration, Configuring the operating mode and related parameters for a 10-GE interface
- basic settings configuration, Configuring basic settings of an Ethernet interface or subinterface
- combo interface active port, Changing the active port of a combo interface
- common settings configuration, Configuring common Ethernet interface settings
- configuration, Configuring Ethernet interfaces
- configuration (Layer 3), Configuring a Layer 3 Ethernet interface or subinterface
- dampening, Configuring dampening on an Ethernet interface
- dampening restrictions, Configuration restrictions and guidelines
- display, Displaying and maintaining an Ethernet interface or subinterface
- interface type change (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- interface type change (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- jumbo frame support configuration, Configuring jumbo frame support
- link mode, Configuring the link mode of an Ethernet interface
- loopback test restrictions, Configuration restrictions and guidelines
- loopback testing, Enabling loopback testing on an Ethernet interface
- maintain, Displaying and maintaining an Ethernet interface or subinterface
- MTU setting (Layer 3), Setting the MTU for an Ethernet interface or subinterface
- naming conventions, Ethernet interface naming conventions
- operating mode configuration, Configuring the operating mode
- physical state change suppression, Configuring physical state change suppression on an Ethernet interface
- single combo interface configuration, Configuring a combo interface
- statistics polling interval, Setting the statistics polling interval
- subinterface rate statistics collection, Enabling subinterface rate statistics collection on an Ethernet interface
- subinterface traffic statistics, Enabling the traffic statistics feature on an Ethernet subinterface
- type change (GigabitEthernet), Changing the interface type
- Ethernet subinterface, Configuring Ethernet interfaces, See also Ethernet interface, Layer 2 Ethernet subinterface, Layer 3 Ethernet subinterface
- basic settings, Configuring basic settings of an Ethernet interface or subinterface
- display, Displaying and maintaining an Ethernet interface or subinterface
- maintain, Displaying and maintaining an Ethernet interface or subinterface
- MTU setting (Layer 3), Setting the MTU for an Ethernet interface or subinterface
- rate statistics collection, Enabling subinterface rate statistics collection on an Ethernet interface
- traffic statistics, Enabling the traffic statistics feature on an Ethernet subinterface
- external
- interface external loopback testing (Ethernet), Enabling loopback testing on an Ethernet interface
I
- inloopback interface
- configuration, Configuring an inloopback interface
- display, Displaying and maintaining loopback, null, and inloopback interfaces
- maintain, Displaying and maintaining loopback, null, and inloopback interfaces
- interface
- bulk configuration, Bulk configuring interfaces, Configuration procedure
- configuration (inloopback), Configuring loopback, null, and inloopback interfaces, Configuring an inloopback interface
- configuration (loopback), Configuring loopback, null, and inloopback interfaces, Configuring a loopback interface
- configuration (null), Configuring loopback, null, and inloopback interfaces, Configuring a null interface
- display (WAN serial), Displaying and maintaining serial interfaces
- maintain (WAN serial), Displaying and maintaining serial interfaces
- internal
- interface internal loopback testing (Ethernet), Enabling loopback testing on an Ethernet interface
- ISDN
- interface configuration (WAN), Configuring WAN interfaces
L
- LAN
- interface LAN operating mode (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- Layer 2
- interface configuration (Ethernet), Configuring Ethernet interfaces
- Layer 3
- Ethernet interface configuration, Configuring a Layer 3 Ethernet interface or subinterface
- Ethernet interface MTU setting, Setting the MTU for an Ethernet interface or subinterface
- Ethernet interface type change (GigabitEthernet), Changing the interface type
- Ethernet subinterface configuration, Configuring a Layer 3 Ethernet interface or subinterface
- Ethernet subinterface MTU setting, Setting the MTU for an Ethernet interface or subinterface
- interface configuration (Ethernet), Configuring Ethernet interfaces
- link
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- loopback
- interface loopback testing (Ethernet), Enabling loopback testing on an Ethernet interface
- loopback interface
- configuration, Configuring a loopback interface
- display, Displaying and maintaining loopback, null, and inloopback interfaces
- maintain, Displaying and maintaining loopback, null, and inloopback interfaces
M
- maintaining
- interface, Displaying and maintaining loopback, null, and inloopback interfaces
- interface (CPOS), Displaying and maintaining CPOS interfaces
- interface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- interface (POS), Displaying and maintaining POS interfaces
- interface (WAN CE1), Displaying and maintaining CE1 interfaces
- interface (WAN CT3), Displaying and maintaining CT3 interfaces
- interface (WAN E1-F), Displaying and maintaining E1-F interfaces
- interface (WAN T3), Displaying and maintaining T3 interfaces
- interfaces (WAN serial), Displaying and maintaining serial interfaces
- subinterface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- maximum transmission unit. Use
- mode
- interface card operation (CPOS), Configuring the operating mode of an interface card
- interface configuration (WAN CE1 in CE1 mode), Configuring a CE1 interface in CE1 mode
- interface configuration (WAN CE1 in E1 mode), Configuring a CE1 interface in E1 mode
- interface configuration (WAN CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- interface configuration (WAN CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- interface configuration (WAN CT3), Configuring a CT3 interface
- interface configuration (WAN E1-F in framed mode), Configuring an E1-F interface in framed mode
- interface configuration (WAN E1-F in unframed mode), Configuring an E1-F interface in unframed mode
- interface configuration (WAN T3), Configuring a T3 interface
- interface LAN operation (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- interface link (Ethernet), Configuring the link mode of an Ethernet interface
- interface operation (high-speed CPOS), Configuring the operating mode of a 2.5 Gbps CPOS interface
- interface WAN operation (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- MTU
- subinterface MTU setting (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
N
- network
- interface basic configuration (CPOS), Configuring basic functions of a CPOS interface
- interface basic settings (Ethernet), Configuring basic settings of an Ethernet interface or subinterface
- interface card operating mode (CPOS), Configuring the operating mode of an interface card
- interface common settings configuration (Ethernet), Configuring common Ethernet interface settings
- interface configuration (CPOS E1 channel), Configuring an E1 channel
- interface configuration (CPOS T1 channel), Configuring a T1 channel
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (Ethernet single combo), Configuring a combo interface
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (inloopback), Configuring an inloopback interface
- interface configuration (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- interface configuration (loopback), Configuring a loopback interface
- interface configuration (null), Configuring a null interface
- interface configuration (POS channel), Configuring a POS channel interface
- interface configuration (POS), Configuring a standard POS interface
- interface configuration (WAN CE1 in CE1 mode), Configuring a CE1 interface in CE1 mode
- interface configuration (WAN CE1 in E1 mode), Configuring a CE1 interface in E1 mode
- interface configuration (WAN CE1), Configuring a CE1 interface
- interface configuration (WAN CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- interface configuration (WAN CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- interface configuration (WAN CT3), Configuring a CT3 interface
- interface configuration (WAN E1-F in framed mode), Configuring an E1-F interface in framed mode
- interface configuration (WAN E1-F in unframed mode), Configuring an E1-F interface in unframed mode
- interface configuration (WAN E1-F), Configuring an E1-F interface
- interface configuration (WAN serial synchronous), Synchronous serial interface, Configuring a synchronous serial interface
- interface configuration (WAN serial), Configuring a serial interface
- interface configuration (WAN T3), Configuring a T3 interface
- interface dampening (Ethernet), Configuring dampening on an Ethernet interface
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router connection (POS), Connecting routers through POS interfaces across a Frame Relay network
- interface J0 and J1 overhead bytes (Ethernet 10-GE), Setting the J0 and J1 overhead bytes
- interface jumbo frame support (Ethernet), Configuring jumbo frame support
- interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- interface loopback testing (Ethernet), Enabling loopback testing on an Ethernet interface
- interface MTU setting (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- interface operating mode (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- interface operating mode (high-speed CPOS), Configuring the operating mode of a 2.5 Gbps CPOS interface
- interface parameter (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- interface parameter configuration (WAN CE1), Configuring other CE1 interface parameters
- interface parameter configuration (WAN E1-F), Configuring other E1-F interface parameters
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- interface type change (GigabitEthernet), Changing the interface type
- interface type change (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface, Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- interface type change (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface, Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- interface type change (POS), Changing the interface type
- subinterface basic settings (Ethernet), Configuring basic settings of an Ethernet interface or subinterface
- subinterface configuration (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- subinterface configuration (POS), Configuring a POS subinterface
- subinterface configuration (WAN serial), Configuring a subinterface
- subinterface MTU setting (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- subinterface rate statistics collection (Ethernet), Enabling subinterface rate statistics collection on an Ethernet interface
- subinterface rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- subinterface traffic statistics (Ethernet), Enabling the traffic statistics feature on an Ethernet subinterface
- network management
- interface bulk configuration, Bulk configuring interfaces, Configuration procedure
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (Ethernet), Configuring Ethernet interfaces
- interface configuration (inloopback), Configuring loopback, null, and inloopback interfaces
- interface configuration (loopback), Configuring loopback, null, and inloopback interfaces
- interface configuration (null), Configuring loopback, null, and inloopback interfaces
- interface configuration (POS), Configuring POS interfaces, POS interface configuration examples
- interface configuration (WAN), Configuring WAN interfaces
- notifying
- interface B1/B2/B3 alarm configuration (POS), Configuring B1/B2/B3 alarms for standard POS interfaces
- null interface
- configuration, Configuring loopback, null, and inloopback interfaces, Configuring a null interface
- display, Displaying and maintaining loopback, null, and inloopback interfaces
- maintain, Displaying and maintaining loopback, null, and inloopback interfaces
P
- packet
- packet over SONET. Use POS
- parameter
- interface J0 and J1 overhead bytes (Ethernet 10-GE), Setting the J0 and J1 overhead bytes
- interface parameter (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- interface parameter configuration (WAN CE1), Configuring other CE1 interface parameters
- interface parameter configuration (WAN E1-F), Configuring other E1-F interface parameters
- path
- overhead. See
- physical
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- POH
- CPOS interface overhead byte, POH
- polling
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- POS interface
- B1/B2/B3 alarm configuration, Configuring B1/B2/B3 alarms for standard POS interfaces
- channel configuration, Configuring a POS channel interface
- configuration, Configuring POS interfaces, Configuring a standard POS interface, POS interface configuration examples
- CPOS interfaces, CPOS interfaces
- direct router connection, Directly connecting routers through POS interfaces
- display, Displaying and maintaining POS interfaces
- Frame Relay router connection, Connecting routers through POS interfaces across a Frame Relay network
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface type change, Changing the interface type
- interface type change (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface, Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- interface type change (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface, Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- maintain, Displaying and maintaining POS interfaces
- overview, POS
- SDH, SONET and SDH
- SONET, SONET and SDH
- subinterface configuration, Configuring a POS subinterface
- subinterface rate statistics collection, Enabling subinterface rate statistics collection
- troubleshoot, Troubleshooting POS interfaces
- troubleshoot data link layer down, Data link layer down
- troubleshoot dropped IP packets, Packet loss
- troubleshoot physical state down, Interface physically down
- procedure
- bulk configuring interfaces, Bulk configuring interfaces, Configuration procedure
- changing combo interface active port (Ethernet combo), Changing the active port of a combo interface
- changing interface type (GigabitEthernet), Changing the interface type
- changing interface type (Layer 3 GigabitEthernet > POS), Changing a Layer 3 GigabitEthernet interface to a standard POS interface, Changing a Layer 3 GigabitEthernet interface to a standard POS interface
- changing interface type (POS > Layer 3 GigabitEthernet), Changing a standard POS interface to a Layer 3 GigabitEthernet interface, Changing a standard POS interface to a Layer 3 GigabitEthernet interface
- changing interface type (POS), Changing the interface type
- channelizing interface (CPOS 2.5 Gbps > 622 Mbps), Channelizing a 2.5 Gbps CPOS interface into 622 Mbps channels
- channelizing interface (CPOS 2.5 Gbps 622 Mbps > 155 Mbps), Channelizing a 622 Mbps channel into 155 Mbps channels on a 2.5 Gbps CPOS interface
- configuring interface (CPOS E1 channel), Configuring an E1 channel
- configuring interface (CPOS T1 channel), Configuring a T1 channel
- configuring interface (CPOS), CPOS interface configuration task list
- configuring interface (CPOS-E1), CPOS-E1 interface configuration example
- configuring interface (Ethernet single combo), Configuring a combo interface
- configuring interface (high-speed CPOS), High-speed CPOS interface configuration example
- configuring interface (inloopback), Configuring an inloopback interface
- configuring interface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- configuring interface (loopback), Configuring a loopback interface
- configuring interface (null), Configuring a null interface
- configuring interface (POS channel), Configuring a POS channel interface
- configuring interface (POS), Configuring a standard POS interface
- configuring interface (WAN CE1 in CE1 mode), Configuring a CE1 interface in CE1 mode
- configuring interface (WAN CE1 in E1 mode), Configuring a CE1 interface in E1 mode
- configuring interface (WAN CE1), Configuring a CE1 interface
- configuring interface (WAN CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- configuring interface (WAN CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- configuring interface (WAN CT3), Configuring a CT3 interface
- configuring interface (WAN E1-F in framed mode), Configuring an E1-F interface in framed mode
- configuring interface (WAN E1-F in unframed mode), Configuring an E1-F interface in unframed mode
- configuring interface (WAN E1-F), Configuring an E1-F interface
- configuring interface (WAN serial synchronous), Configuring a synchronous serial interface
- configuring interface (WAN serial), Configuring a serial interface
- configuring interface (WAN T3), Configuring a T3 interface
- configuring interface B1/B2/B3 alarm (POS), Configuring B1/B2/B3 alarms for standard POS interfaces
- configuring interface basic settings (Ethernet), Configuring basic settings of an Ethernet interface or subinterface
- configuring interface basics (CPOS), Configuring basic functions of a CPOS interface
- configuring interface card operating mode (CPOS), Configuring the operating mode of an interface card
- configuring interface common settings (Ethernet), Configuring common Ethernet interface settings
- configuring interface dampening (Ethernet), Configuring dampening on an Ethernet interface
- configuring interface jumbo frame support (Ethernet), Configuring jumbo frame support
- configuring interface link mode (Ethernet), Configuring the link mode of an Ethernet interface
- configuring interface operating mode (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- configuring interface operating mode (Ethernet), Configuring the operating mode
- configuring interface operating mode (high-speed CPOS), Configuring the operating mode of a 2.5 Gbps CPOS interface
- configuring interface parameter (WAN CE1), Configuring other CE1 interface parameters
- configuring interface parameter (WAN E1-F), Configuring other E1-F interface parameters
- configuring interface parameters (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- configuring interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- configuring subinterface (Layer 3 Ethernet), Configuring a Layer 3 Ethernet interface or subinterface
- configuring subinterface (POS), Configuring a POS subinterface
- configuring subinterface (WAN serial), Configuring a subinterface
- configuring subinterface basic settings (Ethernet), Configuring basic settings of an Ethernet interface or subinterface
- connecting interface direct router (POS), Directly connecting routers through POS interfaces
- connecting interface Frame Relay routers (POS), Connecting routers through POS interfaces across a Frame Relay network
- displaying bulk interface configuration, Displaying and maintaining bulk interface configuration
- displaying interface, Displaying and maintaining loopback, null, and inloopback interfaces
- displaying interface (CPOS), Displaying and maintaining CPOS interfaces
- displaying interface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- displaying interface (POS), Displaying and maintaining POS interfaces
- displaying interface (WAN CE1), Displaying and maintaining CE1 interfaces
- displaying interface (WAN CT3), Displaying and maintaining CT3 interfaces
- displaying interface (WAN E1-F), Displaying and maintaining E1-F interfaces
- displaying interface (WAN T3), Displaying and maintaining T3 interfaces
- displaying interfaces (WAN serial), Displaying and maintaining serial interfaces
- displaying subinterface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- enabling interface loopback testing (Ethernet), Enabling loopback testing on an Ethernet interface
- enabling subinterface rate statistics collection (Ethernet), Enabling subinterface rate statistics collection on an Ethernet interface
- enabling subinterface rate statistics collection (POS), Enabling subinterface rate statistics collection
- enabling subinterface rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- enabling subinterface traffic statistics (Ethernet), Enabling the traffic statistics feature on an Ethernet subinterface
- maintaining interface, Displaying and maintaining loopback, null, and inloopback interfaces
- maintaining interface (CPOS), Displaying and maintaining CPOS interfaces
- maintaining interface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- maintaining interface (POS), Displaying and maintaining POS interfaces
- maintaining interface (WAN CE1), Displaying and maintaining CE1 interfaces
- maintaining interface (WAN CT3), Displaying and maintaining CT3 interfaces
- maintaining interface (WAN E1-F), Displaying and maintaining E1-F interfaces
- maintaining interface (WAN T3), Displaying and maintaining T3 interfaces
- maintaining interfaces (WAN serial), Displaying and maintaining serial interfaces
- maintaining subinterface (Ethernet), Displaying and maintaining an Ethernet interface or subinterface
- setting interface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- setting interface statistics polling interval (Ethernet), Setting the statistics polling interval
- setting subinterface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- settinginterface J0 and J1 overhead bytes (Ethernet 10-GE), Setting the J0 and J1 overhead bytes
- troubleshooting E1 channel interface loop+link layer protocol down detected (CPOS), Loop and link layer protocol down state detected on serial interfaces created for E1 channels on the CPOS interface
- troubleshooting interface (CPOS), Troubleshooting CPOS interfaces
- troubleshooting interface (POS), Troubleshooting POS interfaces
- troubleshooting interface data link layer down (POS), Data link layer down
- troubleshooting interface dropped IP packets (POS), Packet loss
- troubleshooting interface physical state down (POS), Interface physically down
S
- scenario
- interface application scenario (CPOS), CPOS interface application scenarios
- SDH
- CPOS interface overhead byte, Overhead bytes
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (POS), Configuring POS interfaces, POS interface configuration examples
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router connection (POS), Connecting routers through POS interfaces across a Frame Relay network
- POS interface, SONET and SDH
- section overhead. See
- serial interface, Configuring a serial interface, See also specific (e.g., asynchronous, CE3, E1-F, FCM, etc.)
- subinterface rate statistics collection (WAN), Enabling subinterface rate statistics collection on a serial interface
- WAN configuration, Configuring a serial interface
- WAN synchronous configuration, Synchronous serial interface, Configuring a synchronous serial interface
- setting
- interface J0 and J1 overhead bytes (Ethernet 10-GE), Setting the J0 and J1 overhead bytes
- interface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- subinterface MTU (Layer 3 Ethernet), Setting the MTU for an Ethernet interface or subinterface
- single combo interface, Configuring a combo interface
- SNMP
- interface B1/B2/B3 alarm configuration (POS), Configuring B1/B2/B3 alarms for standard POS interfaces
- SOH
- CPOS interface overhead byte, SOH
- SONET
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (POS), Configuring POS interfaces, POS interface configuration examples
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router connection (POS), Connecting routers through POS interfaces across a Frame Relay network
- POS interface, SONET and SDH
- state
- interface state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- statistics
- interface statistics polling interval (Ethernet), Setting the statistics polling interval
- subinterface rate statistics collection (Ethernet), Enabling subinterface rate statistics collection on an Ethernet interface
- subinterface rate statistics collection (POS), Enabling subinterface rate statistics collection
- subinterface rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- subinterface traffic statistics (Ethernet), Enabling the traffic statistics feature on an Ethernet subinterface
- subinterface, Configuring Ethernet interfaces, See also
- configuration (WAN serial), Configuring a subinterface
- rate statistics collection (WAN serial), Enabling subinterface rate statistics collection on a serial interface
- suppressing
- interface physical state change suppression (Ethernet), Configuring physical state change suppression on an Ethernet interface
- switching
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (Ethernet), Configuring Ethernet interfaces
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (inloopback), Configuring loopback, null, and inloopback interfaces, Configuring an inloopback interface
- interface configuration (loopback), Configuring loopback, null, and inloopback interfaces, Configuring a loopback interface
- interface configuration (null), Configuring loopback, null, and inloopback interfaces, Configuring a null interface
- interface configuration (POS), Configuring POS interfaces, POS interface configuration examples
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router connection (POS), Connecting routers through POS interfaces across a Frame Relay network
- synchronous
- interface configuration (WAN serial), Synchronous serial interface, Configuring a synchronous serial interface
- Synchronous Digital Hierarchy. Use
- Synchronous Optical Network. Use
- system
- interface bulk configuration, Bulk configuring interfaces, Configuration procedure
T
- T1
- interface configuration (CPOS T1 channel), Configuring a T1 channel
- T3 interface
- display, Displaying and maintaining T3 interfaces
- maintain, Displaying and maintaining T3 interfaces
- WAN configuration, Configuring a T3 interface
- transmitting
- interface configuration (CPOS), Configuring CPOS interfaces, CPOS interface configuration task list, CPOS interface configuration examples
- interface configuration (CPOS-E1), CPOS-E1 interface configuration example
- interface configuration (high-speed CPOS), High-speed CPOS interface configuration example
- interface configuration (POS), Configuring POS interfaces, POS interface configuration examples
- interface direct router connection (POS), Directly connecting routers through POS interfaces
- interface Frame Relay router connection (POS), Connecting routers through POS interfaces across a Frame Relay network
- trapping
- interface B1/B2/B3 alarm configuration (POS), Configuring B1/B2/B3 alarms for standard POS interfaces
- troubleshooting
- E1 channel interface loop+link layer protocol down detected (CPOS), Loop and link layer protocol down state detected on serial interfaces created for E1 channels on the CPOS interface
- interface (CPOS), Troubleshooting CPOS interfaces
- interface (POS), Troubleshooting POS interfaces
- interface data link layer down (POS), Data link layer down
- interface dropped IP packets (POS), Packet loss
- interface physical state down (POS), Interface physically down
W
- WAN
- interface WAN operating mode (Ethernet 10-GE), Configuring the operating mode and related parameters for a 10-GE interface
- WAN interface
- configuration, Configuring WAN interfaces
- configuration (CE1 in CE1 mode), Configuring a CE1 interface in CE1 mode
- configuration (CE1 in E1 mode), Configuring a CE1 interface in E1 mode
- configuration (CE1), Configuring a CE1 interface
- configuration (CT3 in CT3 mode), Configuring a CT3 interface in CT3 mode
- configuration (CT3 in T3 mode), Configuring a CT3 interface in T3 mode
- configuration (CT3), Configuring a CT3 interface
- configuration (E1-F in framed mode), Configuring an E1-F interface in framed mode
- configuration (E1-F in unframed mode), Configuring an E1-F interface in unframed mode
- configuration (E1-F), Configuring an E1-F interface
- configuration (serial synchronous), Synchronous serial interface, Configuring a synchronous serial interface
- configuration (serial), Configuring a serial interface
- configuration (T3), Configuring a T3 interface
- display (CE1), Displaying and maintaining CE1 interfaces
- display (CT3), Displaying and maintaining CT3 interfaces
- display (E1-F), Displaying and maintaining E1-F interfaces
- display (T3), Displaying and maintaining T3 interfaces
- maintain (CE1), Displaying and maintaining CE1 interfaces
- maintain (CT3), Displaying and maintaining CT3 interfaces
- maintain (E1-F), Displaying and maintaining E1-F interfaces
- maintain (T3), Displaying and maintaining T3 interfaces
- parameter configuration (CE1), Configuring other CE1 interface parameters
- parameter configuration (E1-F), Configuring other E1-F interface parameters
- serial interface display, Displaying and maintaining serial interfaces
- serial interface maintain, Displaying and maintaining serial interfaces
- subinterface configuration (serial), Configuring a subinterface
- subinterface rate statistics collection (serial), Enabling subinterface rate statistics collection on a serial interface
- Wide Area Network. Use