Configuring a POS subinterface
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a POS subinterface and enter its view. | interface pos interface-number.subnumber [ p2mp | p2p ] | You can create POS subinterfaces only on Frame Relay-enabled standard POS interfaces. |
3. Configure the subinterface description. | description text | By default, the description of a POS subinterface is interface name Interface, for example, Pos2/1/1.1 Interface. |
4. Set the MTU. | mtu size | The default setting is 1500 bytes. |
5. Configure the expected bandwidth of the subinterface. | bandwidth bandwidth-value | By default, the expected bandwidth (in kbps) is the interface baud rate divided by 1000. |
6. Restore the default settings for the POS subinterface. | default | N/A |
7. Shut down and bring up the POS subinterface. | shutdown undo shutdown | By default, a POS subinterface is up. For the settings to take effect, you must perform this step. |