Enabling subinterface rate statistics collection on an Ethernet interface
IMPORTANT: This feature is resource intensive. When you use this feature, make sure you fully understand its impact on system performance. | ||
After you enable subinterface rate statistics collection on an Ethernet interface, the device periodically refreshes the rate statistics on the subinterfaces of this Ethernet interface. You can use the display interface command to display the subinterface rate statistics.
To enable subinterface rate statistics collection on an Ethernet interface:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Ethernet interface view. | interface interface-type interface-number | N/A |
3. Enable subinterface rate statistics collection on the Ethernet interface. | sub-interface rate-statistic | By default, subinterface rate statistics collection is disabled on an Ethernet interface. |