Configuration procedure

1. Enter system view.

system-view

N/A

2. Enter interface range view.

• interface range { interface-type interface-number [ to interface-type interface-number ] } &<1-24>

• interface range name name [ interface { interface-type interface-number [ to interface-type interface-number ] } &<1-24> ]

By using the interface range name command, you assign a name to an interface range and can specify this name rather than the interface range to enter the interface range view.

3. (Optional.) Display commands available for the first interface in the interface range.

Enter a question mark (?) at the interface range prompt.

N/A

4. Use available commands to configure the interfaces.

Available commands depend on the interface.

N/A

5. (Optional.) Verify the configuration.

display this

N/A