bandwidth
Use bandwidth to set the expected bandwidth for a VSI interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth (in kbps) equals the interface baudrate divided by 1000.
Views
VSI interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth is an informational parameter used only by higher-layer protocols for calculation. You cannot adjust the actual bandwidth of an interface by using this command.
Examples
# Set the expected bandwidth to 10000 kbps for VSI-interface 100.
<Sysname> system-view [Sysname] interface vsi-interface 100 [Sysname-Vsi-interface100] bandwidth 10000