xconnect vsi
Use xconnect vsi to map an AC to a VSI.
Use undo xconnect vsi to restore the default.
Syntax
xconnect vsi vsi-name [ track track-entry-number&<1-3> ]
undo xconnect vsi
Default
An AC is not mapped to any VSI.
Views
Layer 3 interface view
Predefined user roles
network-admin
Parameters
vsi-name: Specifies the VSI name, a case-sensitive string of 1 to 31 characters.
track track-entry-number&<1-3>: Specifies a space-separated list of up to three track entry numbers in the range of 1 to 1024. The AC is up only if a minimum of one associated track entry is in positive state.
Usage guidelines
To monitor the status of an AC, associate it with track entries.
For traffic that matches the Layer 3 interface, the system uses the VSI's MAC address table to make a forwarding decision.
Examples
# Map GigabitEthernet 1/1/1 to the VSI vpn1.
<Sysname> system-view [Sysname] vsi vpn1 [Sysname-vsi-vpn1] quit [Sysname] interface gigabitethernet 1/1/1 [Sysname-GigabitEthernet1/1/1] xconnect vsi vpn1
Related commands
display l2vpn interface
vsi