tunnel
Use tunnel to assign a VXLAN tunnel to a VXLAN.
Use undo tunnel to remove a VXLAN tunnel from a VXLAN.
Syntax
tunnel tunnel-number
undo tunnel tunnel-number
Default
A VXLAN does not contain VXLAN tunnels.
Views
VXLAN view
Predefined user roles
network-admin
Parameters
tunnel-number: Specifies an existing tunnel interface number. The tunnel must be a VXLAN tunnel.
Usage guidelines
This command assigns a VXLAN tunnel to a VXLAN to provide Layer 2 connectivity for the VXLAN between two sites.
You can assign multiple VXLAN tunnels to a VXLAN, and configure a VXLAN tunnel to trunk multiple VXLANs. For a unicast-mode VXLAN, the system floods unknown unicast, multicast, and broadcast traffic to each tunnel in the VXLAN.
Examples
# Assign VXLAN tunnels 0 and 1 to VXLAN 10000.
<Sysname> system-view [Sysname] vsi vpna [Sysname-vsi-vpna] vxlan 10000 [Sysname-vsi-vpna-vxlan-10000] tunnel 0 [Sysname-vsi-vpna-vxlan-10000] tunnel 1
Related commands
display vxlan tunnel