selective-flooding mac-address

Use selective-flooding mac-address to enable selective flood for a MAC address.

Use undo selective-flooding mac-address to disable selective flood for a MAC address.

Syntax

selective-flooding mac-address mac-address

undo selective-flooding mac-address mac-address

Default

Selective flood is disabled for all MAC addresses.

Views

VSI view

Predefined user roles

network-admin

Parameters

mac-address: Specifies a MAC address. The MAC address cannot be all Fs.

Usage guidelines

This command excludes a remote MAC address from the flood suppression done by using the flooding disable command. The VTEP will flood the frames destined for the specified MAC address to remote sites when unknown-unicast floods are confined to the local site.

Examples

# Enable selective flood for 000f-e201-0101 on the VSI vsi1.

<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] selective-flooding mac-address 000f-e201-0101

Related commands

flooding disable