flooding disable
Use flooding disable to disable flooding for a VSI.
Use undo flooding disable to enable flooding for a VSI.
Syntax
flooding disable
undo flooding disable
Default
Flooding is enabled for a VSI.
Views
VSI view
Predefined user roles
network-admin
Usage guidelines
By default, the device floods unknown unicast frames received from the local site to the following interfaces in the frame's VXLAN:
All site-facing interfaces except for the incoming interface.
All VXLAN tunnel interfaces.
To confine unknown unicast traffic to the site-facing interfaces, use this command to disable flooding for the VSI bound to the VXLAN. The VSI will not flood unknown unicast frames to VXLAN tunnel interfaces.
Examples
# Disable flooding for the VSI vsi1.
<Sysname> system-view [Sysname] vsi vsi1 [Sysname-vsi-vsi1] flooding disable