Deploying MVM
MVM subcomponents can be deployed on both the master and subordinate servers. The following information only describes deploying subcomponents on the master server. You can deploy MVM on a subordinate server in the same way it is deployed on the master server.
To deploy MVM:
On the Installation Completed page shown in Figure 56, select Open deployment monitoring agent, and then click Finish.
Figure 56: Installation Completed page
The Batch deploy dialog box opens, as shown in Figure 57.
Figure 57: Batch deploy dialog box
Select the MVM subcomponents you want to deploy, and then click OK.
In this example, select all the MVM subcomponents.
The Please Choose L2VPN Global Parameter Operate page opens, as shown in Figure 58.
Figure 58: Please Choose L2VPN Global Parameter Operate page
Configure the L2VPN parameters as needed.
VPLS can use either LDP or BGP for signaling. When BGP is selected, the VLL and PBB options become unavailable.
Click Deploy.
After the deployment is complete, the Batch deploy succeeded dialog box opens, as shown in Figure 59.
Figure 59: Batch deploy succeeded dialog box
Configure Start iMC Server now as needed, and then click OK.
