Installing and deploying IMC MVM
Install IMC MVM in the same way IMC NTA is installed. For information about the procedure, see "Installing and deploying IMC NTA."
On the Installation Completed page shown in Figure 42, select Open deployment monitoring agent, and then click Finish.
Figure 42: Installation Completed page
The Batch deploy dialog box opens, as shown in Figure 43.
Figure 43: Batch deploy dialog box
Select the MVM subcomponents you want to deploy, and then click OK.
In this example, select all the MVM subcomponents.
The Please Choose L2VPN Global Parameter Operate page opens, as shown in Figure 44.
Figure 44: Please Choose L2VPN Global Parameter Operate page
Configure the L2VPN parameters as needed.
VPLS can use either LDP or BGP for signaling. When BGP is selected, the VLL and PBB options become unavailable.
Click Deploy.
After the deployment is complete, the Batch deploy succeeded dialog box opens, as shown in Figure 45.
Figure 45: Batch deploy succeeded dialog box
Configure the Start iMC Server now option as needed, and then click OK.
