FlexFabric Products
About the HPE FlexFabric 5710 Configuration Guides
This manual provides a brief description of all the Configuration Guides in the manual series.
HPE FlexFabric 5710 Switch Series Fundamentals Configuration Guide
This manual covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.
HPE FlexFabric 5710 Switch Series Virtual Technologies Configuration Guide
This manual describes the proprietary Intelligent Resilient Framework (IRF) technology of Hewlett Packard Enterprise, which provides data center class availability and scalability. IRF creates a fabric from multiple switches. The switches that form the IRF fabric work in 1:N redundancy and appear as one unit in the network. IRF improves management efficiency and streamlines network topologies. It is suitable for highly reliable enterprise networks and data centers.
HPE FlexFabric 5710 Switch Series Layer 2 - LAN Switching Configuration Guide
This manual covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology, port isolation, and spanning tree. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, re-mark VLAN tags, or implement VLAN VPNs over the Internet.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Services Configuration Guide
This manual covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, and ARP.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Routing Configuration Guide
This manual covers the routing technologies for IPv4 and IPv6 networks of different sizes and route filtering.
HPE FlexFabric 5710 Switch Series IP Multicast Configuration Guide
This manual covers Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).
HPE FlexFabric 5710 Switch Series ACL and QoS Configuration Guide
This manual covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
HPE FlexFabric 5710 Switch Series Security Configuration Guide
This manual covers security features. The major security features available on the switch include: identity authentication, secure management, and attack protection.
HPE FlexFabric 5710 Switch Series High Availability Configuration Guide
This manual covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5710 Switch Series Network Management and Monitoring Configuration Guide
This manual covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.
HPE FlexFabric 5710 Switch Series VXLAN Configuration Guide
This manual covers the application scenarios, fundamentals, and configuration of VxLAN.
HPE FlexFabric 5710 Switch Series OpenFlow Configuration Guide
This manual covers the application scenarios, fundamentals, and configuration of OpenFlow.
About the HPE FlexFabric 5710 Command References
This manual provides brief descriptions for all the HPE FlexFabric 5710 Switch Series Command References.
HPE FlexFabric 5710 Switch Series Fundamentals Command Reference
This manual covers the commands for logging in to and setting up an HPE FlexFabric 5710 switch.
HPE FlexFabric 5710 Switch Series Virtual Technologies Command Reference
This manual covers the commands for configuring the proprietary Intelligent Resilient Framework (IRF) technology features of Hewlett Packard Enterprise. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.
HPE FlexFabric 5710 Switch Series Layer 2 - LAN Switching Command Reference
This manual covers the commands for configuring Layer 2 technologies and features in a LAN switched network.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Services Command Reference
This manual covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, and ARP.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Routing Command Reference
This manual covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes.
HPE FlexFabric 5710 Switch Series IP Multicast Command Reference
This manual covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).
HPE FlexFabric 5710 Switch Series ACL and QoS Command Reference
This manual covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
HPE FlexFabric 5710 Switch Series Security Command Reference
This manual covers security feature commands. Available security features include identity authentication, secure management, and attack protection.
HPE FlexFabric 5710 Switch Series High Availability Command Reference
This manual covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5710 Switch Series Network Management and Monitoring Command Reference
This manual covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.
HPE FlexFabric X721 Front-to-Back (JL594) & X722 Back-to-Front (JL554) Fan Trays User Guide
This manual provides information and instructions for installing the FlexFabric X721 and X722 fan trays.
HPE PSR450 Power Supply Series User Guide
This guide provides information and instructions for installing the PSR450 power supply.
HPE FlexFabric 5710 Switch Series VXLAN Command Reference
This manual covers the commands for configuring VxLAN.
HPE FlexFabric 5710 Switch Series OpenFlow Command Reference
This manual covers the commands for configuring OpenFlow.
HPE FlexFabric 5710 Switch Series Installation Guide
The manual provides information and instructions for installing the HPE FlexFabric 5710 Switch Series.
HPE FlexFabric 5710 Switch Series Configuration Guides Index
This manual provides an index for all Configuration Guides in the series.
HPE FlexFabric 5710 Switch Series MCE Configuration Guide
This manual covers MCE fundamentals and configuration.
HPE FlexFabric 5710 Switch Series MCE Command Reference
This manual covers the commands for configuring MCE.
HPE LSWM124XG2Q (JH181A) & LSWM124XG2QL (JH180A) Interface Modules User Guide
This guide provides information and instructions for installing and removing the JH181A and JH180A interface modules.
HPE LSWM124XG2QFC Interface Module (JH184A) User Guide
This guide provides information and instructions for installing and removing the JH1184A interface module.
HPE LSWM18QC Interface Module (JH183A) User Guide
This guide provides information and instructions for installing and removing the JH183A interface module.
HPE LSWM124XGT2Q Interface Module (JH182A) User Guide
This guide provides information and instructions for installing and removing the JH182A interface module.
About the HPE FlexFabric 5940 & 5930 Switch Series Command References
This guide provides a mapping of the features found in each of the Command References for the HPE FlexFabric 5940 & 5930 Switch Series running R2702 and later of the software.
About the HPE FlexFabric 5940 & 5930 Switch Series Configuration Guides
This guide provides a mapping of the features found in each of the Configuration Guides for the HPE FlexFabric 5940 & 5930 Switch Series running R2702 and later of the software.
HPE FlexFabric 5940 & 5930 Switch Series ACL and QoS Command Reference
Updated for R2702 and later of the software, this guide covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
HPE FlexFabric 5940 & 5930 Switch Series ACL and QoS Configuration Guide
Updated for R2702 and later of the software, this guide covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help feature modules (such as QoS and IP routing) classify or filter traffic.
HPE FlexFabric 5940 & 5930 Switch Series Configuration Guides Index
This guide provides a single index for all HPE FlexFabric 5940 & 5930 Switch Series Configuration Guides based on the R2702 and later of the software.
HPE FlexFabric 5940 & 5930 Switch Series EVPN Command Reference
This guide covers the command for configuring EVPN for the R2702 and later software running on the HPE FlexFabric 5940 & 5930.
HPE FlexFabric 5940 & 5930 Switch Series EVPN Configuration Guide
Updated for the R2702 and later version of software, this guide covers EVPN fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series Fundamentals Command Reference
Updated for R2702 and later of the software, this guide covers the commands for logging in to and setting up an HPE FlexFabric 5940 & 5930 switches.
HPE FlexFabric 5940 & 5930 Switch Series Fundamentals Configuration Guide
Updated for R2702 and later of the software, this guide covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.
HPE FlexFabric 5940 & 5930 Switch Series High Availability Command Reference
Updated for R2702 and later of the software, this guide covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5940 & 5930 Switch Series High Availability Configuration Guide
Updated for R2702 and later of the software, this guide covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5940 & 5930 Switch Series IP Multicast Command Reference
Updated for R2702 and later of the software, this guide covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).
HPE FlexFabric 5940 & 5930 Switch Series IP Multicast Configuration Guide
Updated for R2702 and later of the software, this guide covers Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).
HPE FlexFabric 5940 & 5930 Switch Series Virtual Technologies Command Reference
Updated for R2702 and later of the software, this guide covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.
HPE FlexFabric 5940 & 5930 Switch Series Virtual Technologies Configuration Guide
Updated for R2702 and later of the software, this guide covers Intelligent Resilient Framework (IRF) technology, which provides data center class availability and scalability. IRF creates a large virtual device from multiple devices. The IRF member devices work in 1:N redundancy and appear as one unit in the network. IRF improves management efficiency and streamlines network topology. It is suitable for highly reliable enterprise networks and data centers.
HPE FlexFabric 5940 & 5930 Switch Series Layer 2 - LAN Switching Command Reference
Updated for R2702 and later of the software, this guide covers the commands for configuring Layer 2 technologies and features in a LAN switched network.
HPE FlexFabric 5940 & 5930 Switch Series Layer 2 - LAN Switching Configuration Guide
Updated for R2702 and later of the software, this guide covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology and port isolation. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags.
HPE FlexFabric 5940 & 5930 Switch Series Layer 3 - IP Routing Command Reference
Updated for R2702 and later of the software, this guide covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.
HPE FlexFabric 5940 & 5930 Switch Series Layer 3 - IP Routing Configuration Guide
Updated for R2702 and later of the software, this guide covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.
HPE FlexFabric 5940 & 5930 Switch Series Layer 3 - IP Services Command Reference
Updated for R2702 and later of the software, this guide covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.
HPE FlexFabric 5940 & 5930 Switch Series Layer 3 - IP Services Configuration Guide
Updated for R2702 and later of the software, this guide covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.
HPE FlexFabric 5940 & 5930 Switch Series MPLS Command Reference
Updated for R2702 and later of the software, this guide covers the MPLS commands.
HPE FlexFabric 5940 & 5930 Switch Series MPLS Configuration Guide
Updated for R2702 and later of the software, this guide covers MPLS fundamentals and configurations.
HPE FlexFabric 5940 & 5930 Switch Series Network Management and Monitoring Command Reference
Updated for R2702 and later of the software, this guide covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.
HPE FlexFabric 5940 & 5930 Switch Series Network Management and Monitoring Configuration Guide
Updated for R2702 and later of the software, this guide covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.
HPE FlexFabric 5940 & 5930 Switch Series OpenFlow Command Reference
Updated for R2702 and later of the software, this guide covers the commands for configuring OpenFlow.
HPE FlexFabric 5940 & 5930 Switch Series OpenFlow Configuration Guide
Updated for R2702 and later of the software, this guide covers OpenFlow fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series Security Command Reference
Updated for R2702 and later of the software, this guide covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and uRPF).
HPE FlexFabric 5940 & 5930 Switch Series Security Configuration Guide
Updated for R2702 and later of the software, this guide covers security features. The major security features available on the switch include: identity authentication (AAA and PKI), access security (802.1X, MAC authentication, portal, and port security), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and uRPF).
HPE FlexFabric 5940 & 5930 Switch Series VXLAN Command Reference
Updated for R2702 and later of the software, this guide covers the commands for configuring VXLAN.
HPE FlexFabric 5940 & 5930 Switch Series VXLAN Configuration Guide
Updated for R2702 and later of the software, this guide covers VXLAN fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series EVB Command Reference
Updated for software version R2702 and later, this guide covers the commands needed for configuring EVB.
HPE FlexFabric 5940 & 5930 Switch Series FC and FCoE Command Reference
Updated for software version R2702 and later, this guide covers the commands needed for configuring FC and FCoE on the FlexFabric 5940 and 5930 switches.
HPE FlexFabric 5940 & 5930 Switch Series SPB Command Reference
Updated for software version R2702 and later, this guide covers the commands needed to configure SPB.
HPE FlexFabric 5940 & 5930 Switch Series TRILL Command Reference
Updated for software version R2702 and later, this guide covers the commands needed to configure TRILL.
HPE FlexFabric 5940 & 5930 Switch Series EVB Configuration Guide
Updated for software version R2702 and later, this guide describes EVB fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series FC and FCoE Configuration Guide
Updated for software version R2702 and later, this guide describes FC and FCoE fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series SPB Configuration Guide
Updated for software release R2702 and later, this guide describes SPBM fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series TRILL Configuration Guide
Updated for software version R2702 and later, this guide describes TRILL fundamentals and configuration.
HPE FlexFabric 5940 & 5930 Switch Series Telemetry Configuration Guide
This guide provide information on configuring gRPC and protocol buffer code.
HPE FlexFabric 5940 & 5930 Switch Series Telemetry Command Reference
This guide provides command information for configuring gRPC.
HPE FlexFabric 5950 EVPN Configuration Guide
Updated for R6301, this manual provides information on configuring EVPN.
HPE FlexFabric 5950 EVPN Command Reference
Updated for R6301, this guide provides information on the commands used for EVPN.
HPE FlexFabric 5950 FC and FCoE Command Reference
Updated for R6301, this guide provides information on the commands used to configure FCoE.
HPE FlexFabric 5950 Configuration Guides Index
Updated for R6301, this guide provides a consolidated index for all the Configuration Guides for the HPE FlexFabric 5950 Switch Series running the 6106 release of software.
HPE FlexFabric 5950 ACL and QoS Configuration Guide
Updated for R301, this guide covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help feature modules (such as QoS and IP routing) classify or filter traffic.
HPE FlexFabric 5950 Fundamentals Configuration Guide
This guide covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.
HPE FlexFabric 5950 High Availability Configuration Guide
This guide covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5950 IP Multicast Configuration Guide
This guide covers Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP).
HPE FlexFabric 5950 Virtual Technologies Configuration Guide
This guide covers Intelligent Resilient Framework (IRF) technology, which provides data center class availability and scalability. IRF creates a large virtual device from multiple devices. The IRF member devices work in 1:N redundancy and appear as one unit in the network. IRF improves management efficiency and streamlines network topology. It is suitable for highly reliable enterprise networks and data centers.
HPE FlexFabric 5950 Layer 2 - LAN Switching Configuration Guide
This guide covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology and port isolation. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags.
HPE FlexFabric 5950 Layer 3 - IP Routing Configuration Guide
This guide covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.
HPE FlexFabric 5950 Layer 3 - IP Services Configuration Guide
This guide covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.
HPE FlexFabric 5950 MPLS Configuration Guide
This guide covers MPLS features.
HPE FlexFabric 5950 Network Management and Monitoring Configuration Guide
This guide covers features that help you manage and monitor your network, for example, manage system events and test network connectivity.
HPE FlexFabric 5950 OpenFlow Configuration Guide
This guide covers OpenFlow fundamentals and configuration.
HPE FlexFabric 5950 Security Configuration Guide
This guide covers security features. The major security features available on the switch include: identity authentication, access security, secure management, and attack protection.
HPE FlexFabric 5950 VXLAN Configuration Guide
This guide covers VxLAN fundamentals and configuration.
HPE FlexFabric 5950 ACL and QoS Command Reference
Updated for R6301, this guide covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
HPE FlexFabric 5950 Fundamentals Command Reference
This guide covers the commands for logging in to and setting up an HPE FlexFabric 5950 switch.
HPE FlexFabric 5950 High Availability Command Reference
This guide covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5950 IP Multicast Command Reference
This guide covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP).
HPE FlexFabric 5950 Virtual Technologies Command Reference
This guide covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.
HPE FlexFabric 5950 Layer 2 - LAN Switching Command Reference
This guide covers the commands for configuring Layer 2 technologies and features in a LAN switched network.
HPE FlexFabric 5950 Layer 3 - IP Routing Command Reference
This guide covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.
HPE FlexFabric 5950 Layer 3 - IP Services Command Reference
This guide covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.
HPE FlexFabric 5950 MPLS Command Reference
This guide covers the MPLS commands.
HPE FlexFabric 5950 Network Management and Monitoring Command Reference
This guide covers the commands that help you manage and monitor your network, for example, manage system events and test network connectivity.
HPE FlexFabric 5950 OpenFlow Command Reference
This guide covers the commands for configuring OpenFlow.
HPE FlexFabric 5950 Security Command Reference
This guide covers security feature commands. Available security features include identity authentication, secure management, and attack protection.
HPE FlexFabric 5950 VXLAN Command Reference
This guide covers the commands for configuring VXLAN.
About the HPE FlexFabric 5950 Configuration Guides
This guide provides a brief description of each of the Configuration Guides for the HPE FlexFabric 5950 Switch Series running Release 6301 of Comware.
About the HPE FlexFabric 5950 Command References
This guide provides a brief description of each of the Command References for the HPE FlexFabric 5950 Switch Series running Release 6301 of Comware.
HPE FlexFabric 5950 FC and FCoE Configuration Guide
Updated for R6301, this guide provides instructions for configuring FCoE.
About the HPE FlexFabric 5710 Configuration Guides
This manual provides a brief description of all the Configuration Guides in the manual series.
HPE FlexFabric 5710 Switch Series Fundamentals Configuration Guide
This manual covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.
HPE FlexFabric 5710 Switch Series Virtual Technologies Configuration Guide
This manual describes the proprietary Intelligent Resilient Framework (IRF) technology of Hewlett Packard Enterprise, which provides data center class availability and scalability. IRF creates a fabric from multiple switches. The switches that form the IRF fabric work in 1:N redundancy and appear as one unit in the network. IRF improves management efficiency and streamlines network topologies. It is suitable for highly reliable enterprise networks and data centers.
HPE FlexFabric 5710 Switch Series Layer 2 - LAN Switching Configuration Guide
This manual covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology, port isolation, and spanning tree. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, re-mark VLAN tags, or implement VLAN VPNs over the Internet.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Services Configuration Guide
This manual covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, and ARP.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Routing Configuration Guide
This manual covers the routing technologies for IPv4 and IPv6 networks of different sizes and route filtering.
HPE FlexFabric 5710 Switch Series IP Multicast Configuration Guide
This manual covers Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).
HPE FlexFabric 5710 Switch Series ACL and QoS Configuration Guide
This manual covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
HPE FlexFabric 5710 Switch Series Security Configuration Guide
This manual covers security features. The major security features available on the switch include: identity authentication, secure management, and attack protection.
HPE FlexFabric 5710 Switch Series High Availability Configuration Guide
This manual covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5710 Switch Series Network Management and Monitoring Configuration Guide
This manual covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.
HPE FlexFabric 5710 Switch Series VXLAN Configuration Guide
This manual covers the application scenarios, fundamentals, and configuration of VxLAN.
HPE FlexFabric 5710 Switch Series OpenFlow Configuration Guide
This manual covers the application scenarios, fundamentals, and configuration of OpenFlow.
About the HPE FlexFabric 5710 Command References
This manual provides brief descriptions for all the HPE FlexFabric 5710 Switch Series Command References.
HPE FlexFabric 5710 Switch Series Fundamentals Command Reference
This manual covers the commands for logging in to and setting up an HPE FlexFabric 5710 switch.
HPE FlexFabric 5710 Switch Series Virtual Technologies Command Reference
This manual covers the commands for configuring the proprietary Intelligent Resilient Framework (IRF) technology features of Hewlett Packard Enterprise. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.
HPE FlexFabric 5710 Switch Series Layer 2 - LAN Switching Command Reference
This manual covers the commands for configuring Layer 2 technologies and features in a LAN switched network.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Services Command Reference
This manual covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, and ARP.
HPE FlexFabric 5710 Switch Series Layer 3 - IP Routing Command Reference
This manual covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes.
HPE FlexFabric 5710 Switch Series IP Multicast Command Reference
This manual covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).
HPE FlexFabric 5710 Switch Series ACL and QoS Command Reference
This manual covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.
HPE FlexFabric 5710 Switch Series Security Command Reference
This manual covers security feature commands. Available security features include identity authentication, secure management, and attack protection.
HPE FlexFabric 5710 Switch Series High Availability Command Reference
This manual covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.
HPE FlexFabric 5710 Switch Series Network Management and Monitoring Command Reference
This manual covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.
HPE FlexFabric 5710 Switch Series VXLAN Command Reference
This manual covers the commands for configuring VxLAN.
HPE FlexFabric 5710 Switch Series OpenFlow Command Reference
This manual covers the commands for configuring OpenFlow.
HPE FlexFabric 5710 Switch Series Configuration Guides Index
This manual provides an index for all Configuration Guides in the series.
HPE FlexFabric 5710 Switch Series MCE Configuration Guide
This manual covers MCE fundamentals and configuration.
HPE FlexFabric 5710 Switch Series MCE Command Reference
This manual covers the commands for configuring MCE.
HPE FlexFabric 5710 Switch Series FCoE Command Reference
This guide covers the commands used for configuring FCoE on the FlexFabric 5710 Switch Series.
HPE FlexFabric 5710 Switch Series FCoE Configuration Guide
This guide explains how to configure FCoE on the FlexFabric 5710 Switch Series.
HPE FlexFabric 5710 Switch Series Telemetry Command Reference
The guide contains the commands needed to configure gRPC.
HPE FlexFabric 5710 Switch Series Telemetry Configuration Guide
This guide provide information and instructions on configuring gRPC and protocol buffer code.