Models, specifications, and compatibility

Gigabit SFP optical transceiver modules use LC connectors.

The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. Where support for a Revision A, B, or C transceiver existed, Revision D parts are also supported.

Table 43: Specifications for Gigabit SFP optical transceiver modules (1)
Product name (SKU) DOM - Digital Optical Monitoring (4x4 part #) Central wl (nm) Fiber mode Fiber diameter (µm) Modal bandwidth (MHz*km) Transmission distance
HPE X121 1G SFP LC SX Transceiver (J4858C)

Aruba 1G SFP LC SX 500m MMF XCVR (J4858D)

Yes

(1990-4395 & 1990-4415)

850 MMF 50/125 500 (OM2)

400

550 m (1804.46 ft)

500 m (1640.42 ft)

62.5/125 200 (OM1)

160

275 m (902.23 ft)

220 m (721.78 ft)

HPE X121 1G SFP LC LX Transceiver (J4859C)

Aruba 1G SFP LC LX 10km SMF XCVR (J4859D)

Yes

(1990-4116, 1990-4414, & 1990-4608)

1310 SMF 9/125 N/A 10 km (6.21 miles)
MMF 50/125 500 or 400 550 m (1804.46 ft)
MMF 62.5/125 500 550 m (1804.46 ft)
HPE X121 1G SFP LC LH Transceiver (J4860C)

Aruba 1G SFP LC LH 70km SMF XCVR (J4860D)

Yes

(1990-4363)

1550 SMF 9/125 N/A 70 km (43.49 miles)
Table 44: Specifications for Gigabit SFP optical transceiver modules (2)
Product name (SKU) Optical parameters (dBm)
Transmit power Receive power
HPE X121 1G SFP LC SX Transceiver (J4858C)

Aruba 1G SFP LC SX 500m MMF XCVR (J4858D)

–9.5 to 0 –17 to –3
HPE X121 1G SFP LC LX Transceiver (J4859C)

Aruba 1G SFP LC LX 10km SMF XCVR (J4859D)

–9.5 to –3 –20 to –3
HPE X121 1G SFP LC LH Transceiver (J4860C)

Aruba 1G SFP LC LH 70km SMF XCVR (J4860D)

0 to +5 –22 to –3
Table 45: Compatibility for Gigabit SFP optical transceiver modules
Product name SKU Minimum software required (J4858C/J4858D, J4859C/J4859D, J4860C/J4860D) Comments
1400 Switch Series J9078A All  
1410 Switch Series J9561A All  
1700 Switch Series J9080A VB.01.09  
1800 Switch Series J9028A/B PB.02.09  
1810 Switch Series J9450A, J9660A J4858C/J4858D: All

J4859C/J4859D: All

Gig LH (J4850C/J4860D) is supported only in the J9450A model.
J9801A, J9803A, J9834A J4858C/J4858D: All

J4859C/J4859D: All

Gig LH (J4860C/J4860D) is not supported.
1820 Switch Series J9980A, J9981A, J9983A, J9984A J4858C/J4858D: All

J4859C/J4859D: All

J4860C/J4860D: Not supported

Gig LH (J4860C/J4860D) is not supported on the 1820 series.
1850 Switch Series JL169A J4858C/JL4858D: All

J4859C/J4859D: All

J4860C/J4860D: Not supported

Gig LH (J4860C/J4860D) is not supported on the 1850 series. Other 1850 models not listed do not have SFP ports.
1920S JL381A, JL382A, JL384A, JL385A, JL386A J4858C/J4858D: All

J4859C/J4859D: All

J4860C/J4860D: Not supported

Gig LH (J4860C/J4860D) is not supported on the 1920S series.

Models JL380A and JL383A do not include SFP ports.

2510 Switch Series J9019A/B, J9020A, J9279A, J9280A All  
2520 Switch Series J9137A, J9138A, J9298A, J9299A All  
2530 Switch Series J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, J9779A, J9780A, J9781A, J9782A, J9783A, J9853A, J9854A, J9855A, J9856A All  
2540 Switch Series JL354A, JL355A, JL356A, JL357A All  
2600 Switch Series J4899A/B/C, J4900A/B/C, J8164A, J8165A, J8762A H.08.98  
2610 Switch Series J9085A, J9086A, J9087A, J9088A, J9089A All  
2615-8-PoE Switch J9565A All  
2620 Switch Series J9623A, J9624A, J9625A, J9626A, J9627A All  
2800 Switch Series J4903A, J4904A i.08.103  
2810 Switch Series J9021A, J9022A All  
2900 Switch Series J9049A, J9050A T.13.45  
2910al Switch Series J9145A, J9146A, J9147A, J9148A All For use in the SFP ports on the models listed, and in the J9008A 2-port 10GbE SFP⁠+ al module.
2915-8G-PoE Switch J9562A All  
2920 Series Switches J9726A, J9727A, J9728A, J9729A, J9836A All For use in the SFP ports on the models listed. Also for use in the dual-speed SFP⁠+ ports of the J9731A 2-Port 10GbE SFP⁠+ Module.
2930F Series Switches JL253A, JL254A, JL255A, JL256A, JL258A, JL259A, JL260A, JL261A, JL262A, JL263A, JL264A, JL557A, JL558A, JL559A All  
2930M Switch Series JL319A, JL320A, JL321A, JL322A, JL323A, JL324A All For use in SFP ports on switch and an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module.
3400cl Switch Series J4905A, J4906A All  
3500 Series Switches J9470A, J9471A, J9472A, J9473A K.14.31  
3500yl Switch Series J8692A, J8693A All For use in the SFP ports on the models listed, and in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Model
J9310A, J9311A K.14.50  
3800 Switch Series J9573A, J9574A, J9575A, J9576A, J9584A All  
3810M Switch Series JL071A, JL072A, JL073A, JL074A, JL076A, JL075A All For use in the JL075A 3810M switch. Also for use in any 3810M switch with a JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module installed.
4200gl Switch Series J4893A, J4908A G.07.103  
4200vl Switch Series J8776A, J9033A All  
5300xl Switch Series J4878A/B, J4907A E.10.36  
5400zl Switch Series J8705A, J8706A All  
J9308A K.14.34  
J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A K.15.02.0004 The J9309A 4-port SFP⁠+ module only supports 10G transceivers.

The J9538A 8-port SFP⁠+ v2 module supports both 1G and 10G transceivers.

The J9538A 8-port SFP⁠+ v2 module supports both 1G and 10G transceivers.

5400R Switch Series J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A All The J9309A 4-port SFP⁠+ module only supports 10G transceivers.

The J9538A 8-port SFP⁠+ v2 module supports both 1G and 10G transceivers.

J9988A, J9989A, J9990A, J9993A KB.15.17  
6108 Switch J4902A H.07.88  
6120 Switch Series 498358-B21, 516733-B21 SX, LX: all versions LH: not supported  
6200yl-24G-mGBIC Switch J8992A All  
Aruba 6200 Switch Series All models 10.04.1000

Only the following 4x4 part numbers are supported:

J4858C/J4858D:

  • 1990-4395

  • 1990-4415

J4859C/J4859D:

  • 1990-4116

  • 1990-4414

J4860C/J4860D:

  • 1990-4363

Aruba 6300 Switch Series All models 10.04.0001
Aruba 6400 Modules R0X39B, R0X40B

R0X41A, R0X42A,R0X43A

10.04.1000

R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 series.

Only the following 4x4 part numbers are supported:

J4858C/J4858D:

  • 1990-4395

  • 1990-4415

J4859C/J4859D:

  • 1990-4116

  • 1990-4414

J4860C/J4860D:

  • 1990-4363

R0X44A 10.04.2000
6600 Switch Series J9263A, J9264A K.14.03  
J9451A K.14.24  
8100fl Switch J8735A All  
8200zl Switch Series J8705A, J8706A All  
J9308A K.14.34  
J9537A, J9549A, J9535A, J9637A, J9538A, J9548A, J9536A K.15.02.0004 The J9309A 4-port SFP⁠+ module only supports 10G transceivers

The J9538A 8-port SFP⁠+ v2 module supports both 1G and 10G transceivers.

Aruba 8320 48p 10G SFP/SFP⁠+ and 6p 40G QSFP⁠+ Switch JL479A All

Only the following 4x4 part numbers are supported:

J4858C/J4858D:

  • 1990-4395

  • 1990-4415

J4859C/J4859D:

  • 1990-4116

  • 1990-4414

J4860C/J4860D:

  • 1990-4363

Aruba 8325 Switch Series JL624A, JL625A 10.03.0010

Only the following 4x4 part numbers are supported:

J4858C/J4858D:

  • 1990-4395

  • 1990-4415

J4859C/J4859D:

  • 1990-4116

  • 1990-4414

J4860C/J4860D:

  • 1990-4363

The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details.

1G optics at the opposite end of the link must NOT enable auto-negotiation and operate in full duplex mode.

Aruba 8400X Modules JL363A

JL687A

10.00.0018

10.04.2000

Only the following 4x4 part numbers are supported:

J4858C/J4858D:

  • 1990-4395

  • 1990-4415

J4859C/J4859D:

  • 1990-4116

  • 1990-4414

J4860C/J4860D:

  • 1990-4363

JL687A 32p 25G module requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). See the Installation Guide for details.

JL687A: 1G optics at the opposite end of the link must NOT enable auto-negotiation and operate in full duplex mode (does not apply to the JL363A module)

9300m Switch Series J4885A, J4894A All  
9408sl Switch J8684A All