Models, specifications, and compatibility

SFP⁠+ optical transceiver modules provide a transmission rate of 10.31 Gbps and use LC connectors.

The specifications for Revision D and E transceiver products are the same as the specified Revision A, B, C SKUs. Where support for a Revision A, B, or C transceiver existed, Revision D or E parts are also supported.

Table 35: Specifications for SFP⁠+ optical transceiver modules (1)
Product Name (SKU) DOM - Digital Optical Monitoring (4x4 part #) Central wl (nm) Fiber mode Fiber diameter (µm) Bandwidth (MHz*km) Transmission distance
HPE X132 10G SFP⁠+ LC SR Transceiver (J9150A)

Aruba 10G SFP⁠+ LC SR 300m MMF XCVR (J9150D)

Yes

(1990-4391,

1990-4175,

1990-4635,

1990-4634)

850 MMF 50/125 4700 (OM4)

2000 (OM3)

500 (OM2)

400

400 m (1312.34 ft)

300 m (984.25 ft)

82 m (269.03 ft)

66 m (216.54 ft)

62.5/125

200 (OM1)

160

33 m (108.27 ft)

26 m (85.30 ft)

HPE X132 10G SFP⁠+ LC LRM Transceiver (J9152A)

Aruba 10G SFP⁠+ LC LRM 220m MMF XCVR (J9152D)

Yes

(1990-4485)

See note below regarding MCP.

1310 MMF 50/125 1500

500 (OM2)

400

220 m (721.78 ft)

220 m (721.78 ft)

100 m (328.08 ft)

62.5/125 200 (OM1)

160

220 m (721.78 ft)

220 m (721.78 ft)

SMF 9/125 N/A 300m (987.25 ft)
HPE X132 10G SFP⁠+ LC LR Transceiver (J9151A)

Aruba 10G SFP⁠+ LC LR 10km SMF XCVR (J9151D and J9151E)

Yes

(1990-4657,

1990-4694)

1310 SMF 9/125 N/A 10 km (6.21 miles)
HPE X132 10G SFP⁠+ LC ER Transceiver (J9153A)

Aruba 10G SFP⁠+ LC ER 40km SMF XCVR (J9153D)

Yes

(1990-4365,

1990-4656)

1550 SMF 9/125 N/A 40 km (24.86 miles)
NOTE:

J9152D 10G LRM (Long Reach Multimode) with 4x4 1990-4485 is tuned so that it does not require a Mode Conditioning Patch (MCP) cable. Older J9152A with 4x4 numbers other than 1990-4485 may require an MCP when you use OM1 or OM2 fiber cables. Never use mode conditioning patch cables for OM3 or OM4 fiber types. For more information about mode conditioning patch cables, see related sections in the IEEE 802.3 standard.

Table 36: Specifications for SFP⁠+ optical transceiver modules (2)
Product name (SKU) Optical parameters (dBm)
Transmit power Receive power
HPE X132 10G SFP⁠+ LC SR Transceiver (J9150A)

Aruba 10G SFP⁠+ LC SR 300m MMF XCVR (J9150D)

–7.3 to –1 –9.9 to +0.5
HPE X132 10G SFP⁠+ LC LRM Transceiver (J9152A)

Aruba 10G SFP⁠+ LC LRM 220m MMF XCVR (J9152D)

–6.5 to +0.5 –6.5 to +1.5
HPE X132 10G SFP⁠+ LC LR Transceiver (J9151A)

Aruba 10G SFP⁠+ LC LR 10km SMF XCVR (J9151D/J9151E)

–8.2 to +0.5 –14.4 to +0.5
HPE X132 10G SFP⁠+ LC ER Transceiver (J9153A)

Aruba 10G SFP⁠+ LC ER 40km SMF XCVR (J9153D)

–4.7 to +4 –15.8 to –1
Table 37: Compatibility for the SFP⁠+ optical transceiver module
Product name SKU Minimum software required Comments
10G-SR, LR, LRM (J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D) 10G-ER (J9153A/J9153D)
1850 Switch Series JL169A J9150A/J9150D: All

J9151A/J9151D: All

J9152A/J9152D: All

J9153A/J9153D is not supported on the 1850 Switch Series. Unlisted models do not have SFP⁠+ ports.
2530 Switch Series J9853A, J9854A, J9855A, J9856A All All Unlisted models do not have SFP⁠+ ports.
2540 Switch Series JL354A, JL355A, JL356A, JL357A All (J9150A/J9150D and J9151A/J9151D only)

J9152A/J9152D (LRM) is not supported in any 2540 model

All J9152A/J9152D (LRM) is not supported in any 2540 model.
2910al Switch Series J9008A All W.15.07.0002 Unlisted models do not have SFP⁠+ ports.
2920 Switch Series J9726A, J9727A, J9728A, J9729A, J9836A All   For use in an installed J9731A Aruba 2920 2-port 10GbE SFP⁠+ Module.
2930F Switch Series JL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL558A, JL559A All (J9150A/J9150D and J9151A/J9151D/J9151E only)

J9152A/J9152D (LRM) is not supported in any 2930F model

All Unlisted models do not have SFP⁠+ ports.

J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2930F model.

2930M Switch Series JL319A, JL320A, JL321A, JL322A, JL323A, JL324A All All For use in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module.
  R0M67A, R0M68A WC.16.05 WC.16.05  
3500yl Switch Series J8692A, J8693A, J9310A, J9311A K.14.50 and later K.15.02.0004 and later For use in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Module.
3800 Switch Series J9575A, J9576A, J9573A, J9574A, J9584A All All Unlisted models do not have SFP⁠+ ports.
3810M Switch Series JL071A, JL072A, JL073A, JL074A, JL076A All All For use in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module
JL075A All All For use in the JL075A SFP⁠+ ports or in an installed JL083A Aruba 3810M/2930M 4SFP⁠+ MACsec Module
5400zl Switch Series J9309A K.14.39 K.15.02.0004 The J9309A 4-port SFP⁠+ module supports only 10G transceivers.

10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.

J9538A, J9548A, J9536A K.15.02.0004 K.15.02.0004  
5400R Switch Series J9538A, J9548A, J9536A All All  
J9990A, J9993A KB.15.17 KB.15.17  
6120 Switch Series 516733-B21 (6120XG) All Not supported 498358-B21 (6120G/XG) has 1GB SFP and 10G XFP or CX4 ports and does not support these SFP⁠+ transceivers.
6200yl Switch Series J8992A K.14.50 K.15.02.0004 J8992A fixed SFP ports are 1GB and do not support these SFP⁠+ transceivers.

For use in an installed J9312A 10GbE 2-port SFP⁠+/2-port CX4 yl Module.

Aruba 6200 Switch Series All models 10.04.1000

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6200 Series

10.04.1000

Only the listed 4x4 parts are fully supported

J9153A/J9153D

  • 1990-4365

  • 1990-4656

J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 6200 Series

Only the listed 4x4 parts are fully supported

J9150A/J9150D

  • 1990-4391

  • 1990-4175

  • 1990-4635

  • 1990-4634

J9151A/J9151D

  • 1990-4657

  • 1990-4727

  • 1990-4694

J9151E

  • 1990-4727

  • 1990-4694

J9152A/J9152D: Not Supported

Aruba 6300 Switch Series All models (M and F) 10.04.0001

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6300 Modules

10.04.0001

J9153A/J9153D

  • 1990-4365

  • 1990-4656

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6300 series

J9150A/J9150D

  • 1990-4391

  • 1990-4175

  • 1990-4635

  • 1990-4634

J9151A/J9151D

  • 1990-4657

  • 1990-4727

  • 1990-4694

J9151E

  • 1990-4727

  • 1990-4694

J9152A/J9152D: Not Supported

Aruba 6400 Modules R0X39B, R0X40B

R0X41A, R0X42A, R0X43A

10.04.1000 10.04.1000 R0X38A/R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 modules.

J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 6400 modules

J9150A/J9150D

  • 1990-4391

  • 1990-4175

  • 1990-4635

  • 1990-4634

J9151A/J9151D

  • 1990-4657

  • 1990-4727

  • 1990-4694

J9152A/J9152D: Not Supported

J9151E

  • 1990-4727

  • 1990-4694

R0X44A 10.04.2000

J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 6400 Modules

10.04.2000

J9153A/J9153D

  • 1990-4365

  • 1990-4656

6600 Switch Series J9264A, J9265A K.14.03 K.15.02.0004  
J9452A K.14.24 K.15.02.0004  
8200zl Switch Series J9309A K.14.39 K.15.02.0004 The J9309A four-port SFP⁠+ module only supports 10G transceivers.
J9538A, J9548A, J9536A K.15.02.0004 K.15.02.0004 10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.
Aruba 8320 48p 10G SFP/SFP⁠+ and 6p 40G QSFP⁠+ Switch JL479A All (J9150A/J9150D and J9151A/J9151D only)

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 8320 JL479A

All

Only the listed 4x4 parts are fully supported

J9150A/J9150D

  • 1990-4391

  • 1990-4175

  • 1990-4635

  • 1990-4634

J9151A/J9151D

  • 1990-4657

  • 1990-4727

  • 1990-4694

J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 8320 Series

J9151E

  • 1990-4727

  • 1990-4694

Aruba 8325 48Y8C Switch JL624A, JL625A 10.03.0030

J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 8325 switches

10.03.0030

Only the listed 4x4 parts are fully supported

J9153A/J9153D

  • 1990-4365

  • 1990-4656

Only the listed 4x4 parts are fully supported

J9150A/J9150D

  • 1990-4391

  • 1990-4175

  • 1990-4635

  • 1990-4634

8325 is only compatible with J9151E or later. Do not attempt to use J9151D or earlier.

J9151E

  • 1990-4727

  • 1990-4694

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 8325 switches.

The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs).

See the Installation Guide for details.

Aruba 8400X modules JL363A

JL687A

All

10.04.2000

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the JL687A module.

JL363A: All

JL687A: 10.04.2000

Only the listed 4x4 parts are fully supported

J9150A/J9150D

  • 1990-4391

  • 1990-4175

  • 1990-4635

  • 1990-4634

J9151E

  • 1990-4727

  • 1990-4694

JL363A module: supports

J9152A/J9152D

• 1990-4485

JL687A module does NOT support J9152A/J9152D (or any 10G LRM technology)

The JL687A module requires configuration of "interface groups" (groups of 4 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (default is to use 25G transceivers / DACs).

See the Installation Guide for details.

NOTE:

J9152D 10G LRM with 4x4 1990-4485 is tuned so that it does not require the use of a mode conditioning patch (MCP) cable. Older J9152A with 4x4 #s other than 1990-4485 may require an MCP when you use OM1 or OM2 fiber cables. Never use mode conditioning patch cables for OM3 or OM4 fiber types. For more information about mode conditioning patch cables, see related parts in the IEEE 802.3 standard.