show ip interface

Syntax

show ip interface <INTERFACE-ID> [vsx-peer]

Description

Shows status and configuration information for an IPv4 interface.

Command context

Manager (#)

Parameters

<INTERFACE-ID>

Specifies the name of an interface. Format: member/slot/port.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

switch# show ip interface 1/1/1

Interface 1/1/1 is up
 Admin state is up
 Hardware: Ethernet, MAC Address: 70:72:cf:fd:e7:b4
 IPv4 address 192.168.1.1/24
 MTU 1500
 RX
          0 packets, 0 bytes
 TX
          0 packets, 0 bytes