show environment temperature

Syntax

show environment temperature [detail] [vsf | vsx-peer]

Description

Shows the temperature information from sensors in the switch that affect fan control.

Command context

Operator (>) or Manager (#)

Parameters

detail

Shows detailed information from each temperature sensor.

vsf

Shows output from the VSF member-id on switches that support VSF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Usage

Temperatures are shown in Celsius.

Valid values for status are the following:

normal

Sensor is within nominal temperature range.

min

Lowest temperature from this sensor.

max

Highest temperature from this sensor.

low_critical

Lowest threshold temperature for this sensor.

critical

Highest threshold temperature for this sensor.

fault

Fault event for this sensor.

emergency

Over temperature event for this sensor.

Examples

Showing current temperature information for an 8400 switch:

switch# show environment temperature

Temperature information
------------------------------------------------------------------------------
                                                     Current
Mbr/Slot-Sensor                 Module Type        temperature  Status
------------------------------------------------------------------------------
1/1-PCIE-Switch                 line-card-module     95.82 C    normal
1/1-Processor                   line-card-module     0.00 C     fault
1/1-Switch-ASIC                 line-card-module     116.36 C   emergency
1/1-Switch-ASIC-Internal        line-card-module     108.25 C   critical
1/2-PCIE-Switch                 line-card-module     95.82 C    normal
...

Showing detailed temperature information for an 8400 switch:

switch# show environment temperature detail

Detailed temperature information
---------------------------------------------------
Mbr/Slot-Sensor      : 1/1-PCIE-Switch
Module Type          : line-card-module
Module Description   : JL363A 8400X 32P 10G SFP/SFP+ Msec Mod
Status               : normal
Fan-state            : normal
Current temperature  : 95.82 C
Minimum temperature  : 93.52 C
Maximum temperature  : 96.15 C
...