`vsf renumber-to`

Syntax

vsf renumber-to <MEMBER-ID>

Description

Renumbers VSF member 1 to a value from 2 through 10 (for 6300 devices). Renumbers VSF member 1 to a value from 2 through 8 (for the 6200F device). Changing the member number causes the switch to reboot with the new member number. Only member 1 can be renumbered.

NOTE:

VSF links must be configured before renumbering a switch. Renumbering will be disallowed if no links are configured or there are provisioned/physically present members.

Command context

config

Parameters

<MEMBER-ID>: Member number to which the member will be renumbered. Required. Range for 6200F devices: 2-8. Range for 6300 devices: 2-10.

Authority

Administrators

Examples

Renumbering primary VSF member from 1 to 2:

switch(config)# vsf renumber-to 2
Member 1 cannot be renumbered until all other members are removed.

switch(config)# vsf renumber-to 2
Member 1 cannot be renumbered until a VSF link is configured.

switch(config)# vsf renumber-to 2
This will save the VSF configuration and reboot the switch.
Do you want to continue (y/n)? y