show vsx config-consistency

Syntax

show vsx config-consistency [vsx-peer]

Description

Displays the VSX global configuration consistency between two VSX switches.

Command context

Operator (>) or Manager (#)

Parameters

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

The following example shows a comparison between the two VSX switches.

switch# show vsx config-consistency
Configurations                          Local                             Peer
------------------                      ------                            ------
Software Version                        XL.10.0x.xxxxAE                   XL.10.0x.xxxxAE
System MAC                              94:f1:28:ef:25:00                 f4:03:43:80:28:00
System Profile                          Advanced                          Advanced
ISL hello interval                      1                                 1
ISL dead interval                       20                                20
ISL hold interval                       0                                 0
Keepalive hello interval                1                                 1
Keepalive dead interval                 3                                 3
Keepalive UDP port                      7678                              7678


VSX VLAN List
-------------
Local ISL VLANs : 1,100
Peer ISL VLANs  : 1,10

VSX Active Forwarding
---------------------
Interface VLANs      : 2, 5-9
Peer Interface VLANs : 2, 5-10