show ipv6 pim6 rp-set learned

Syntax

show ipv6 pim6 rp-set learned [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the multicast group support for dynamically learned RP assignments. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM RP set learned information:

switch# show ipv6 pim6 rp-set learned all-vrfs

VRF: blu

Status and Counters - PIM-SM(IPv6) Learned RP-Set Information
Group Prefix       : ff08::1:3/64
RP Address         : 2007::01
Hold Time (sec)    : 60
Expire Time (sec)  : 0
Group Prefix       : ff08::1:4/64
RP Address         : 2007::01
Hold Time (sec)    : 60
Expire Time (sec)  : 92

VRF: default

Status and Counters - PIM-SM(IPv6) Learned RP-Set Information
Group Prefix       : ff08::1:5/64
RP Address         : 2001::01
Hold Time (sec)    : 60
Expire Time (sec)  : 0
Group Prefix       : ff08::1:6/64
RP Address         : 2002::01
Hold Time (sec)    : 60
Expire Time (sec)  : 92