show ipv6 pim6 rp-set

Syntax

show ipv6 pim6 rp-set [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the multicast group support for both the learned C-RP assignments and any statically configured RP assignments. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing PIM RP set information:

switch# show ipv6 pim6 rp-set all-vrfs 

VRF: blu

Status and Counters - PIM-SM(IPv6) Static RP-Set Information

Group Prefix  : ff00::/8
RP Address    : 2004::04
Override [No] : No

Status and Counters - PIM-SM(IPv6) Learned RP-Set Information

Group Prefix       : ff08::1:3/64
RP Address         : 2007::01
Hold Time (sec)    : 60
Expire Time (sec)  : 0
Group Prefix       : ff08::1:4/64
RP Address         : 2007::01
Hold Time (sec)    : 60
Expire Time (sec)  : 92

VRF: default

Status and Counters - PIM-SM(IPv6) Static RP-Set Information

Group Prefix  : ff00::/8
RP Address    : 2003::03
Override [No] : No

Status and Counters - PIM-SM(IPv6) Learned RP-Set Information

Group Prefix       : ff08::1:5/64
RP Address         : 2001::01
Hold Time (sec)    : 60
Expire Time (sec)  : 0
Group Prefix       : ff08::1:6/64
RP Address         : 2002::01
Hold Time (sec)    : 60
Expire Time (sec)  : 92