show ip pim

Syntax

show ip pim [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the PIM router information. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

all-vrfs

Optional. Shows PIM router information on all VRFs.

vrf <VRF-NAME>

Optional. Shows PIM router information for a particular VRF. If the <VRF-NAME> is not specified, it shows information for the default VRF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

Showing IP PIM router:

switch# show ip pim

PIM Global Parameters

VRF                          :  default
PIM Status                   :  Enabled
Join/Prune Interval (sec)    :  60
SPT Threshold                :  Enabled
State Refresh Interval (sec) :  60