rp-candidate source-ip-interface

Syntax

rp-candidate source-ip-interface <INTERFACE-NAME> [group-prefix <GRP-ADDR/GRP-MASK>]

no rp-candidate source-ip-interface <INTERFACE-NAME> [group-prefix <GRP-ADDR/GRP-MASK>]

Description

Enables the Candidate Rendezvous Point (C-RP) operation, and configures the router to advertise itself as a C-RP to the Bootstrap Router (BSR) for the current domain.

This step includes the option to allow the C-RP to be a candidate for all possible multicast groups, or for up to four multicast groups, or ranges of groups. If group-prefix is not given, it considers for all multicast group addresses.

The no form of this command removes the C-RP configuration.

Command context

config-pim

Parameters

<INTERFACE-NAME>

Specifies the interface to use as a source for the C-RP router IP address.

<GRP-ADDR>

Specifies the multicast group address in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255.

<GRP-MASK>

Specifies the address mask in CIDR format (x), where x is a decimal number from 0 to 128.

Authority

Administrators or local user group members with execution rights for this command.

Examples

Configuring and removing candidate source IP interface:

switch(config)# router pim
switch(config-pim)# rp-candidate source-ip-interface vlan40 group-prefix 230.0.0.4/24
switch(config-pim)# no rp-candidate source-ip-interface vlan20