show ipv6 pim6 pending

Syntax

show ipv6 pim6 pending [<GROUP-ADDR>] 
     [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the pending joins on a PIM router. Optionally you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Use this command to determine what flows are being requested on the PIM network. If data availability for a flow is expected, and a join for the flow is pending, the troubleshooting search moves to the source of that flow, since the routers are verified to be seeing the request for data.

Command context

Operator (>) or Manager (#)

Parameters

<GROUP-ADDR>

Specifies a group addressin IPv6 format (xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx), where x is a hexadecimal number from 0 to F.

all-vrfs

Shows information for all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Example

On the 6400 Switch Series, interface identification differs.

Showing pending PIM joins:

switch# show ipv6 pim6 pending
Join Pending

VRF : default
   Group ff08::1:3
       (*,G) Pending
            Incoming Interface:  1/1/1
   Group ff08::1:4
       (*,G) Pending
            Incoming Interface:  1/1/1