show ip pim rpf-override source

Syntax

show ip pim rpf-override source <IP-ADDR> 
     [all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows the RPF override configuration for the specified source. Optionally, you can specify display information by VRF. If no options are specified, it shows information for the default VRF.

Command context

Operator (>) or Manager (#)

Parameters

source <IP-ADDR>

Specifies the RPF source address in IPv4 format (x.x.x.x), where x is a decimal number from 0 to 255.

all-vrfs

Selects all VRFs.

vrf <VRF-NAME>

Specifies the name of a VRF. Default: default.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

Showing PIM RPF override source:

switch# show ip pim rpf-override source 10.0.0.2

VRF                 : default
Static RPF Override
Multicast Source RPF IP Address
-------------------- ------------------
10.0.0.2             1.1.1.1
Showing PIM RPF override source for all VRFs:
switch# show ip pim rpf-override source 10.0.0.2 all-vrfs

VRF                 : default
Static RPF Override
Multicast Source RPF IP Address
-------------------- ------------------
10.0.0.2             1.1.1.1

VRF                 : green
Static RPF Override
Multicast Source RPF IP Address
-------------------- ------------------
10.0.0.2             1.1.1.1