ipv6 pim6-sparse ipv6-addr

Syntax

ipv6 pim6-sparse ipv6-addr {<IPv6-ADDR-VALUE> | any}

no ipv6 pim6-sparse ipv6-addr

Description

Enables the router to dynamically determine the source IP address to use for PIM-SM packets sent from the interface or to use the specific IPv6 address.

The no form of this command removes the currently configured value and sets to the default of any.

Command context

config-if

config-if-vlan

config-lag-if

Parameters

<IP-ADDR-VALUE>

Specifies the source IP address in IPv6 format (xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx), where x is a hexadecimal number from 0 to F.

any

Specifies dynamically determining the source IP from the current IP address of the interface.

Authority

Administrators or local user group members with execution rights for this command.

Examples

Configuring and removing source IP address:

switch(config)# interface vlan40
switch(config-if-vlan)# ipv6 pim6-sparse ipv6-addr 2001::02
switch(config-if-vlan)# no ipv6 pim6-sparse ipv6-addr