show ipv6 helper-address

Syntax

show ipv6 helper-address [interface <INTERFACE-ID>] [vsx-peer]

Description

Shows the helper IP addresses defined for all interfaces or a specific interface.

Command context

Manager (#)

Parameters

interface <INTERFACE-ID>

Specifies an interface. Format: member/slot/port.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

switch# show ipv6 helper-address

 Interface: 1/1/1
 IPv6 Helper Address                            Egress Port
 ---------------------------------------------- -----------
 2001:db8:0:1::                                 -
 FF01::1:1000                                   1/1/2

 Interface: 1/1/2
 IPv6 Helper Address                            Egress Port
 --------------------------------------------   -----------
 2001:db8:0:1::                                 -

switch# show ipv6 helper-address interface 1/1/1

 Interface: 1/1/1
 IPv6 Helper Address                            Egress Port
 ---------------------------------------------- -----------
 2001:db8:0:1::                                 -
 FF01::1:1000                                   1/1/2
switch# show ipv6 helper-address interface 1/1/1

 Interface: 1/1/1
 IPv6 Helper Address                            Egress Port
 ---------------------------------------------- -----------
 2001:db8:0:1::                                 -
 FF01::1:1000                                   1/1/2