show interface tunnel

Syntax

show interface tunnel[<TUNNEL-NUMBER>] [vsx-peer]

Description

Shows configuration settings for all IP tunnels, or a specific tunnel.

Command context

Manager (#)

Parameters

<TUNNEL-NUMBER>

Specifies the number of an IP tunnel. Range: 1 to 127.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Shows configuration settings for tunnel 10, which is a GRE tunnel in the following example.
switch# show interface tunnel10

Interface tunnel10 is up
 Admin state is up
 tunnel type GRE IPv4
 tunnel interface IPv4 address 192.0.2.0/24
 tunnel source IPv4 address 1.1.1.1
 tunnel destination IPv4 address 2.2.2.2
 tunnel ttl 60
RX
            0 input packets              0 bytes
            0 dropped

TX
            0 output packets             0 bytes
            0 dropped

Shows configuration settings for tunnel 12, which is an IPv6 in IPv6 tunnel in the following example.

switch# show interface tunnel12

Interface tunnel12 is up
 Admin state is up
 tunnel type IPv6 in IPv6
 tunnel interface IPv6 address 4::1/64
 tunnel source IPv6 address 2::1
 tunnel destination IPv6 address 2::2
 tunnel ttl 60
 Description: Network2 Tunnel
RX
            0 input packets              0 bytes
            0 dropped

TX
            0 output packets             0 bytes
            0 dropped
Shows configuration settings for all tunnels.
switch# show interface tunnel

Interface tunnel10 is up
 Admin state is up
 tunnel type GRE IPv4
 tunnel interface IPv4 address 192.0.2.0/24
 tunnel source IPv4 address 1.1.1.1
 tunnel destination IPv4 address 2.2.2.2
 tunnel ttl 60
RX
            0 input packets              0 bytes
            0 dropped

TX
            0 output packets             0 bytes
            0 dropped

Interface tunnel11 is up
 Admin state is up
 tunnel type IPv6 in IPv4
 tunnel source IPv4 address 198.51.100.0
 tunnel destination IPv4 address 198.51.200.5
 tunnel ttl 80
 Description: Network11
RX
            0 input packets              0 bytes
            0 dropped

TX
            0 output packets             0 bytes
            0 dropped

Interface tunnel12 is up
 Admin state is up
 tunnel type IPv6 in IPv6
 tunnel interface IPv6 address 4::1/64
 tunnel source IPv6 address 2::1
 tunnel destination IPv6 address 2::2
 tunnel ttl 60
 Description: Network2 Tunnel
RX
            0 input packets              0 bytes
            0 dropped

TX
            0 output packets             0 bytes
            0 dropped