vlan trunk native

Syntax

vlan trunk native <VLAN-ID>

no vlan trunk native [<VLAN-ID>]

Description

Assigns a native VLAN ID to a LAG interface.

The no form of this command removes a native VLAN from a LAG interface and assigns VLAN ID 1 as its native VLAN.

Command context

config-lag-if

Command context

config-if

Parameters

<VLAN-ID>

Specifies the number of the VLAN ID to assign. The VLAN ID must exist.

Maximum number of VLANs supported: 2048 (6200); 4096 (6300, 6400, 8320, 8325, 8400).

VLAN ID range: 2 to 4094.

Authority

Administrators or local user group members with execution rights for this command.

Usage

By default, VLAN ID 1 is assigned as the LAG VLAN ID for all LAG interfaces. VLANs can only be assigned to a nonrouted (layer 2) interface or LAG interface.

Only one VLAN ID can be assigned as the native VLAN. For the interface to forward the native VLAN traffic, the interface has to be allowed explicitly by entering vlan trunk allowed <ID> where the ID is the native VLAN ID. This setting is also applicable to the physical interface.

Examples

Configuring a Layer 2 dynamic aggregation group with native VLAN ID 1 assigned to LAG 1:

For 6200 switch series:
switch(config)# interface lag 1
switch(config-lag-if)# no shutdown
switch(config-lag-if)# lacp mode active
switch(config-lag-if)# vlan trunk native 1
switch(config-lag-if)# trunk allowed 1
For 6300, 6400, 8320, 8325, and 8400 switch series:
switch(config)# interface lag 1
switch(config-lag-if)# no shutdown
switch(config-lag-if)# no routing
switch(config-lag-if)# lacp mode active
switch(config-lag-if)# vlan trunk native 1
switch(config-lag-if)# trunk allowed 1

Configuring a Layer 2 dynamic aggregation group with native VLAN ID 20 assigned to LAG 1:

For 6200 switch series:
switch(config)# interface lag 1
switch(config-lag-if)# no shutdown
switch(config-lag-if)# lacp mode active
switch(config-lag-if)# vlan trunk native 20
switch(config-lag-if)# trunk allowed 20
For 6300, 6400, 8320, 8325, and 8400 switch series:
switch(config)# interface lag 1
switch(config-lag-if)# no shutdown
switch(config-lag-if)# no routing
switch(config-lag-if)# lacp mode active
switch(config-lag-if)# vlan trunk native 20
switch(config-lag-if)# trunk allowed 20

Removing a native VLAN from LAG 1:

switch(config)# interface lag 1
switch(config-lag-if)# no vlan trunk native