show interface qos

Syntax

show interface <INTERFACE-NAME> qos

Description

Shows various QoS settings for a specific interface.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE-NAME>

Specifies the name of an interface on the switch. Format: member/slot/port.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

On the 6400 Switch Series, interface identification differs.

Showing QoS settings for interface 1/1/5:

switch# show interface 1/3/5 qos
Interface 1/3/5 is up
 Admin state is up
 qos trust none (global)
 qos queue-profile factory-default (global)
 qos schedule-profile factory-default (global)
 qos cos 5
 qos dscp 47
 rate-limit broadcast 40000 kbps (40000 actual)
 rate-limit icmp ip-all 10000 kbps (10000 actual