show interface qos

Syntax

show interface <INTERFACE-NAME> qos

Description

Shows various QoS settings for a specific interface.

Command context

Operator (>) or Manager (#)

Parameters

<INTERFACE-NAME>

Specifies the name of an interface on the switch. Use the format member/slot/port (for example, 1/3/1).

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing QoS settings for interface 1/1/5:

switch# show interface 1/1/5 qos
Interface 1/1/5 is down
 Admin state is up
 qos trust none (global)
 qos queue-profile factory-default (global)
 qos schedule-profile EQSExample (override)
 rate-limit unknown-unicast 50 pps (41 actual)
 rate-limit broadcast 500 kbps (505 actual)
 rate-limit multicast 500 kbps (505 actual)

         Max-Bandwidth Kbps      Burst KB
 Q1                10082461           120
 Q4                20164923            32
 Q7                30247384           120