Queue profile

A queue profile defines the queues that are associated with an interface to control the transmission of packets. Each profile supports up to eight queues, numbered 0 to 7. The larger the queue number, the higher its priority during transmission scheduling. Packets are assigned to a queue based on their local priority value (0 to 7). A queue profile must map all eight local priority values to whatever queues are being used on the switch, and a schedule profile must specify the configuration for those same queues. A queue without a local priority value assigned to it is not used to store packets.

The switch is automatically provisioned with an initial queue profile named factory-default which assigns each local priority to the queue of the same number. To see the default queue profile, use the command show qos queue-profile factory-default:

switch# show qos queue-profile factory-default
queue_num local_priorities name
--------- ---------------- ----
0         0                Scavenger_and_backup_data
1         1
2         2
3         3
4         4
5         5
6         6
7         7
More than one local priority value can be assigned to the same queue. For example,
Local Priority Queue
0 0
1 1
2 2
3 3
4 4
5 5
6 5
7 5

The following diagram shows the commands that are used to configure a queue profile.