show bgp paths

Syntax

show bgp [vrf <VRF-NAME>] {ipv4 unicast | ipv6 unicast | all} 
     paths [vsx-peer]

Description

Shows received BGP path information in the database.

Command context

Operator (>) or Manager (#)

Parameters

vrf <VRF-NAME>

Shows the information for a specified VRF.

ipv4 unicast

Shows the information for an IPv4 unicast address family.

ipv6 unicast

Shows the information for an IPv6 unicast address family.

all

Shows the information for all address families and subaddress families.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing received BGP path information from the specified IPv4 unicast neighbor:

switch# show bgp ipv4 unicast paths
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
              i internal, e external S Stale, R Removed
VRF : default
Local Router-ID 9.0.0.1

    Network            Nexthop          Path
--------------------------------------------
*>e 9.0.0.0/24         9.0.0.2          200 65534.65535 3.4 18.54934 3574.8570 5.6
*>e 100.0.0.0/24       9.0.0.2          200
*>e 100.0.1.0/24       9.0.0.2          200
*>e 100.0.2.0/24       9.0.0.2          200
*>e 100.0.3.0/24       9.0.0.2          200
Total number of entries 5