show ip ecmp


show ip ecmp [vsx-peer]


Displays the Equal Cost Multipath (ECMP) configuration.

Command context

Operator (>) or Manager (#)



Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.


Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.


  • On the Aruba 8400, the following fields are enabled by default and cannot be excluded: Source IP, Destination IP, Source Port, Destination Port.


switch# show ip ecmp

ECMP Configuration

 ECMP Status        : Enabled

ECMP Load Balancing by
 Source IP          : Enabled
 Destination IP     : Enabled
 Source Port        : Enabled
 Destination Port   : Enabled