show port-access device-profile
Syntax
show port-access device-profile [interface {all | <INTERFACE-ID>}
[client-status <MAC-ADDR>]]
Description
Shows the client status for a specific MAC address.
Command context
Manager (#
)
Parameters
interface {all | <INTERFACE-ID>}
- Select
all
for all interfaces or specify the name of an interface in the format:member/slot/port
. client-status <MAC-ADDR>
- Specifies a MAC address (
xx:xx:xx:xx:xx:xx
), wherex
is a hexadecimal number from 0 to F.
Authority
Administrators or local user group members with execution rights for this command.
Examples
On the 6400 Switch Series, interface identification differs.
Showing the applied state of the device profiles:
switch# show port-access device-profile Profile Name : accesspoints LLDP Groups : 2920-grp CDP Groups : Role : local_role_1 State : Enabled Profile Name : access_switches LLDP Groups : 2920-grp CDP Groups : Role : local_2920_role State : Enabled Profile Name : lobbyaps LLDP Groups : 2920-grp CDP Groups : Role : test_ap_role State : Disabled
Showing the applied state of the device profile on interface 1/1/3:
switch# show port-access device-profile interface 1/1/3 client-status 00:0c:29:9e:d1:20 Port 1/1/24, Neighbor-Mac b0:00:b4:d9:0f:43 Profile Name: : voip LLDP Group: : CDP Group: : voip Role: : voip State: : applied Failure Reason: :