show fabric

Syntax

show fabric [<SLOT-ID>] [vsx-peer]

Not supported on the 6300 Switch Series.

Description

Shows information about the installed fabrics.

Command context

Operator (>) or Manager (#)

Parameters

<SLOT-ID>

Specifies the member and slot of the fabric to show. For example, to show the module in member 1, slot 2, enter the following:

1/2

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed. This parameter is available on switches that support VSX.

Authority

Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.

Examples

Showing all fabrics on Aruba 6400 switches that have two fabrics:

switch# show fabric

Fabric Modules
==============

     Product                                    Serial
Name Number  Description                        Number     Status
---- ------- --------------------------------   ---------- ----------------
1/1  R0X25A  6410 Chassis                       SG9ZKM9999 Ready
1/2  R0X25A  6410 Chassis                       SG9ZKM9999 Ready

Showing all fabrics on Aruba 6400 switches that have one fabric:

switch# show fabric

Fabric Modules
==============

     Product                                        Serial
Name Number  Description                            Number     Status
---- ------- -------------------------------------- ---------- ----------------
1/1  R0X24A  6405 Chassis                           SG9ZKM9076 Ready
Showing a single fabric module on Aruba 6400 switches:
switch# show fabric 1/1

Fabric module 1/1 is ready
Admin state: Up
Description: 6405 Chassis
Full Description: 6405 Chassis
Serial number: SG00000000
Product number: R0X24A