ipv6 pim6-sparse bfd

Syntax

ipv6 pim6-sparse bfd [disable]

no ipv6 pim6-sparse bfd

Description

Configures BFD on a per-interface basis for an interface associated with the PIM process.

The no form of this command removes the BFD configuration on the interface and sets it to the default configuration.

NOTE:

If BFD is enabled globally, it will be enabled by default on all interfaces. The only exception is when it is disabled specifically on an interface using the ipv6 pim6-sparse bfd disable command.

If BFD is disabled globally, it will be disabled by default on all interfaces. The only exception is when it is enabled specifically on an interface using the ipv6 pim6-sparse bfd command.

Command context

config-if

config-if-vlan

config-lag-if

Parameters

disable

Disables the BFD configuration on the interface.

Authority

Administrators or local user group members with execution rights for this command.

Examples

Enabling the BFD configuration on the interface:

switch(config)# interface vlan 40
switch(config-if-vlan)# ipv6 pim6-sparse bfd

Disabling the BFD configuration on the interface:

switch(config-if-vlan)# ipv6 pim6-sparse bfd disable

Removing the BFD configuration on the interface:

switch(config-if-vlan)# no ipv6 pim6-sparse bfd