show power-over-ethernet
Syntax
6200/6300 Switch Series:
show power-over-ethernet [<INTERFACE-ID>] [brief]6400 Switch Series:
show power-over-ethernet [<MODULE-ID> | <IFRANGE>] [brief]Description
Displays the status information of the full system. Displays the brief status of all port or given port if parameter brief is used. Displays the detailed status of given port.
Command context
Operator (>) or Manager (#)
Parameters
<INTERFACE-ID>Specifies an interface. Format:
member/slot/port.<MODULE-ID>Module name.
<IFRANGE>Interface range.
briefShows information in one-line summary format.
Authority
Operators or Administrators or local user group members with execution rights for this command. Operators can execute this command from the operator context (>) only.
Examples
On the 6400 Switch Series, interface identification differs.
Showing sample output for show power-over-ethernet:
switch# show power-over-ethernet System Power Status for member 1 Configured Power Status : No redundancy Operational Power Status : No redundancy Total Available Power : 740 W Total Failover Pwr Avl : 0 W Total Redundancy Power : 0 W Total Power Drawn : 0 W +/- 6W Total Power Reserved : 0 W Total Remaining Power : 740 W Trap Threshold : 80 % Always-on PoE Enabled : 1/1 Internal Power Total Power PS (Watts) Status ----- ------------- --------------------- 1 0 Absent 2 740 Ok System Power Status for member 2 Configured Power Status : No redundancy Operational Power Status : No redundancy Total Available Power : 600 W Total Failover Pwr Avl : 0 W Total Redundancy Power : 0 W Total Power Drawn : 0 W +/- 6W Total Power Reserved : 0 W Total Remaining Power : 600 W Trap Threshold : 80 % Always-on PoE Enabled : None Internal Power Total Power PS (Watts) Status ----- ------------- --------------------- 1 0 Absent 2 600 Ok
Showing sample output for power-over-ethernet member:
switch# show power-over-ethernet member 1
System Power Status for member 1
Configured Power Status : No redundancy
Operational Power Status : No redundancy
Total Available Power : 740 W
Total Failover Pwr Avl : 0 W
Total Redundancy Power : 0 W
Total Power Drawn : 0 W +/- 6W
Total Power Reserved : 0 W
Total Remaining Power : 740 W
Trap Threshold : 80 %
Always-on PoE Enabled : 1/1
Internal Power
Total Power
PS (Watts) Status
----- ------------- ---------------------
1 0 Absent
2 740 Ok
Showing sample output for power-over-ethernet brief in a VSF stack:
switch# show power-over-ethernet brief
Status and Configuration Information for PoE
Member 1 Power Status
Available: 370 W Reserved: 55.60 W Remaining: 314.40 W
Always-on PoE Enabled: 1/1
PoE Pwr Power Pre-std Alloc PSE Pwr PD Pwr PoE Port PD Cls Type
Port En Priority Detect Act Rsrvd Draw Status Sign
------- --- ------ ------- ----- ------ ------ --------- ----- --- ----
1/1/1 Yes Low Off Class 0.0 W 0.0 W Denied None 4 2
1/1/2 Yes Critical Off Usage 1.6 W 1.5 W Delivering* Single 0 1
1/1/3 Yes High Off Class 54.0 W 25.5 W Delivering*^ Dual 1/3 3
1/1/4 No Low On Usage 0.0 W 0.0 W Disabled None N/A N/A
Member 2 Power Status
Available: 600 W Reserved: 0.00 W Remaining: 600 W
Always-on PoE Enabled: None
PoE Pwr Power Pre-std Alloc PSE Pwr PD Pwr PoE Port PD Cls Type
Port En Priority Detect Act Rsrvd Draw Status Sign
------- --- ------ ------- ----- ------ ------ --------- ----- --- ----
2/1/1 Yes Low Off Class 0.0 W 0.0 W Searching None N/A N/A
2/1/2 Yes Critical Off Usage 0.0 W 0.0 W Searching None N/A N/A
2/1/3 Yes High Off Class 0.0 W 0.0 W Searching None N/A N/A
2/1/4 No Low On Usage 0.0 W 0.0 W Disabled None N/A N/A
*This port may go down in the event of a PSU failure.
^This port is power demoted due to user config or power availabilty.
Showing sample output for power-over-ethernet brief for a Chassis system:
switch# show power-over-ethernet brief
Status and Configuration Information for PoE
Power Status
Available: 370 W Reserved: 55.60 W Remaining: 314.40 W
Always-on PoE Enabled: 1/1,1/3,1/4,1/7
PoE Pwr Power Pre-std Alloc PSE Pwr PD Pwr PoE Port PD Cls Type
Port En Priority Detect Act Rsrvd Draw Status Sign
------- --- ------ ------- ----- ------ ------ --------- ----- --- ----
1/1/1 Yes Low Off Class 0.0 W 0.0 W Denied None 4 2
1/1/2 Yes Critical Off Usage 1.6 W 1.5 W Delivering* Single 0 1
1/1/3 Yes High Off Class 54.0 W 25.5 W Delivering*^ Dual 1/3 3
1/1/4 No Low On Usage 0.0 W 0.0 W Disabled None N/A N/A
*This port may go down in the event of a PSU failure.
^This port is power demoted due to user config or power availabilty.
Showing sample output for power-over-ethernet brief per-port:
switch# show power-over-ethernet 1/1/1 brief
Status and Configuration Information for port 1/1/1
Member 1Power Status
Available: 370 W Reserved: 55.60 W Remaining: 314.40 W
Always-on PoE Enabled: 1/1
PoE Pwr Power Pre-std Alloc PSE Pwr PD Pwr PoE Port PD Cls Type
Port En Priority Detect Act Rsrvd Draw Status Sign
------- --- ------ ------- ----- ------ ------ --------- ----- --- ----
1/1/1 Yes Low Off Class 0.0 W 0.0 W Denied None 4 2
Showing sample output for power-over-ethernet brief for interface range:
switch# show power-over-ethernet 1/1/1-1/1/2 brief
Status and Configuration Information for port 1/1/1-1/1/2
Member 1Power Status
Available: 370 W Reserved: 55.60 W Remaining: 314.40 W
Always-on PoE Enabled: 1/1
PoE Pwr Power Pre-std Alloc PSE Pwr PD Pwr PoE Port PD Cls Type
Port En Priority Detect Act Rsrvd Draw Status Sign
------- --- ------ ------- ----- ------ ------ --------- ----- --- ----
1/1/1 Yes Low Off Class 0.0 W 0.0 W Denied None 4 2
1/1/2 Yes Critical Off Usage 1.6 W 1.5 W Delivering* Single 0 1
Showing sample output for power-over-ethernet for a missing line card:
switch# show power-over-ethernet 1/3 brief Module 1/3 is not physically present.
Showing sample output for power-over-ethernet brief for a missing member:
switch# show power-over-ethernet member 3 brief Member 3 is not physically present.
Showing sample output for power-over-ethernet port when physical interface is not present:
switch# show power-over-ethernet 2/1/1 Interface 2/1/1 is not present.